F5F Stay Refreshed Hardware Desktop Checking if CPU thermal throttling occurs with the Noctua NH-D15 is necessary. Attached screenshots provided.

Checking if CPU thermal throttling occurs with the Noctua NH-D15 is necessary. Attached screenshots provided.

Checking if CPU thermal throttling occurs with the Noctua NH-D15 is necessary. Attached screenshots provided.

Pages (2): Previous 1 2
J
Jasperdoit
Junior Member
36
02-06-2019, 05:36 AM
#11
I thought I had the settings, but when I attempted to overclock I got a -0.125 on voltage and didn’t notice any changes in system info afterward.
J
Jasperdoit
02-06-2019, 05:36 AM #11

I thought I had the settings, but when I attempted to overclock I got a -0.125 on voltage and didn’t notice any changes in system info afterward.

U
UiteOPisa
Member
56
02-06-2019, 12:56 PM
#12
In Hwinfo the VID value isn't the voltage you're looking for—it should be Vcore or CPU core voltage. It's best to read from the voltage controller; otherwise a super IO chip reading works too. If you're unsure which one corresponds to which, share screenshots.
U
UiteOPisa
02-06-2019, 12:56 PM #12

In Hwinfo the VID value isn't the voltage you're looking for—it should be Vcore or CPU core voltage. It's best to read from the voltage controller; otherwise a super IO chip reading works too. If you're unsure which one corresponds to which, share screenshots.

P
Pihvi
Member
50
02-06-2019, 08:54 PM
#13
I was looking through HWInfo and CPU Package Temp and wanted to explore overclocking. I’m unsure how to apply BIOS changes since they don’t seem to update properly. Here’s a screenshot of my voltage set to normal with a -0.05 adjustment, but it still spikes excessively.
P
Pihvi
02-06-2019, 08:54 PM #13

I was looking through HWInfo and CPU Package Temp and wanted to explore overclocking. I’m unsure how to apply BIOS changes since they don’t seem to update properly. Here’s a screenshot of my voltage set to normal with a -0.05 adjustment, but it still spikes excessively.

_
__Toxik__
Junior Member
4
02-11-2019, 07:18 AM
#14
Perform a clean CMOS reset and lower voltage again. Occasionally, especially after not adjusting settings for a while, the new changes may not take effect.
_
__Toxik__
02-11-2019, 07:18 AM #14

Perform a clean CMOS reset and lower voltage again. Occasionally, especially after not adjusting settings for a while, the new changes may not take effect.

B
blakestert
Member
217
02-12-2019, 08:47 AM
#15
Enhanced Multi-Core Performance is activated automatically unless you choose to disable it. Consider turning it off before adjusting the oc settings.
B
blakestert
02-12-2019, 08:47 AM #15

Enhanced Multi-Core Performance is activated automatically unless you choose to disable it. Consider turning it off before adjusting the oc settings.

B
bishopboys68
Posting Freak
899
02-12-2019, 01:19 PM
#16
I've completed that task.
B
bishopboys68
02-12-2019, 01:19 PM #16

I've completed that task.

C
CaptainFurioux
Member
209
02-20-2019, 12:44 PM
#17
I performed that action and the problem persisted. I changed the BIOS settings from F9 to F12 and am now searching for a suitable voltage to enable startup.
C
CaptainFurioux
02-20-2019, 12:44 PM #17

I performed that action and the problem persisted. I changed the BIOS settings from F9 to F12 and am now searching for a suitable voltage to enable startup.

Pages (2): Previous 1 2