Check your NVMe drives, they won't let you install Windows where you need it.
Check your NVMe drives, they won't let you install Windows where you need it.
. Here is the Setup, i had 1 NVME with Windows on it. (a 970) Put a 2nd in as well (which was a boot device from an OEM machine, lets call it the "WD" ), and some Kind of Windows Boot Manager seems to be installed on this one. I could still boot the OS installed on the 970, but i had to tell my UEFI-Bios that the WD is "first boot". This all worked out somehow, but today i got my 3rd NVME (The Fury). After i switched the WD in my PCIE-Gen4x2 Slot so the Fury could go into a Gen4x4 Slot and booted up a Windows Stick and wanted to install W11 on the Fury, and formatting the other 2 NVME afterwards. But i cant get Windows onto it, no matter what i tried so far. I got an error 0x80300024 (which was the only qualified Error i got, usually it just tells me "i cant install windows here".) So, how do i "clear" any Windows Boot Manager from my Devices? Im Ready to wipe all 3 NVMEs if need be, but i just finished cable management in my case, and 2 NVME Slots are covered due to my GPU. So im ready to to anything besides remove the 2 "Old" NVMEs just to get Windows on the Fury...
OK, first of all, im a MBR-Child. Im not that into UEFI, GPT and all. So if the answer contains knowledge about thoose, mayber ELI5 . Here is the Setup, i had 1 NVME with Windows on it. (a 970) Put a 2nd in as well (which was a boot device from an OEM machine, lets call it the "WD" ), and some Kind of Windows Boot Manager seems to be installed on this one. I could still boot the OS installed on the 970, but i had to tell my UEFI-Bios that the WD is "first boot". This all worked out somehow, but today i got my 3rd NVME (The Fury). After i switched the WD in my PCIE-Gen4x2 Slot so the Fury could go into a Gen4x4 Slot and booted up a Windows Stick and wanted to install W11 on the Fury, and formatting the other 2 NVME afterwards. But i cant get Windows onto it, no matter what i tried so far. I got an error 0x80300024 (which was the only qualified Error i got, usually it just tells me "i cant install windows here".) So, how do i "clear" any Windows Boot Manager from my Devices? Im Ready to wipe all 3 NVMEs if need be, but i just finished cable management in my case, and 2 NVME Slots are covered due to my GPU. So im ready to to anything besides remove the 2 "Old" NVMEs just to get Windows on the Fury...
theporkpie21
08-17-2022, 10:45 PM #2Your boot options display shows Windows 970 EVO, Boot Manager SN730, but you'd like to use the Kingston version instead.
Creeperm4ster
08-17-2022, 10:45 PM #3You're aiming to set up Windows 11 on your Kingston Fury and then remove the other two storage drives. Please share a screenshot of your current drive configuration in Windows Drive Setup so I can assist further.
#2 Después de eliminar todas las particiones de Drive 5, pude elegir el espacio sin asignar y avanzar al siguiente paso.
#3 El sistema no pudo prepararse para iniciar la instalación, volviendo al principio.
ThomGamer045
08-17-2022, 10:45 PM #4#1 No se pudo crear una nueva partición ni encontrar la existente.
#2 Después de eliminar todas las particiones de Drive 5, pude elegir el espacio sin asignar y avanzar al siguiente paso.
#3 El sistema no pudo prepararse para iniciar la instalación, volviendo al principio.