F5F Stay Refreshed Hardware Desktop Check online retailers and forums for compatible listings. Consider contacting Samsung support or MSI for assistance.

Check online retailers and forums for compatible listings. Consider contacting Samsung support or MSI for assistance.

Check online retailers and forums for compatible listings. Consider contacting Samsung support or MSI for assistance.

C
cleveman
Junior Member
30
05-27-2016, 09:32 PM
#1
Hello everyone, I'm trying to find the same RAM for my MSI laptop to upgrade it to dual channel 16GB. So far, I haven't had much success and couldn't locate any options. Should I consider Kingston or Crucial RAM? What should I do next? I was hoping to get that specific RAM but found few trustworthy sellers. My details are attached as images.
C
cleveman
05-27-2016, 09:32 PM #1

Hello everyone, I'm trying to find the same RAM for my MSI laptop to upgrade it to dual channel 16GB. So far, I haven't had much success and couldn't locate any options. Should I consider Kingston or Crucial RAM? What should I do next? I was hoping to get that specific RAM but found few trustworthy sellers. My details are attached as images.

C
Chihuahualover
Junior Member
26
05-29-2016, 09:49 PM
#2
It isn't necessary. The first image indicates a DDR4 3200 Mhz CL22 at 1.2v (standard), which also functions at 2933 Mhz CL20 (JEDEC #11 profile, 2 x 1454 Mhz ≈ 2908 Mhz) or 3000 Mhz CL21 (JEDEC #12, 2 x 1527 Mhz = 3054 Mhz). The second image shows the motherboard setting memory to run at 2933 Mhz CL21 (2 x 1463.2 Mhz = 2926.4). This might be due to the CPU limitation, particularly with Intel chips, which restrict memory speeds above 2933 Mhz. Alternatively, the motherboard might default to 2933 Mhz, requiring BIOS adjustments to enable XMP and set 3200 Mhz. If you're limited to 2933 Mhz, consider purchasing a SO-DIMM stick rated for at least 3000 Mhz—this will work fine at 2933 Mhz without issues. You can still opt for a cheaper stick and run both at 2933 Mhz or 3000 Mhz, as the performance gap between 3200 and 3000/2933 Mhz is minimal. So, don't necessarily need Samsung modules; just ensure your sticks meet the minimum voltage and speed requirements.
C
Chihuahualover
05-29-2016, 09:49 PM #2

It isn't necessary. The first image indicates a DDR4 3200 Mhz CL22 at 1.2v (standard), which also functions at 2933 Mhz CL20 (JEDEC #11 profile, 2 x 1454 Mhz ≈ 2908 Mhz) or 3000 Mhz CL21 (JEDEC #12, 2 x 1527 Mhz = 3054 Mhz). The second image shows the motherboard setting memory to run at 2933 Mhz CL21 (2 x 1463.2 Mhz = 2926.4). This might be due to the CPU limitation, particularly with Intel chips, which restrict memory speeds above 2933 Mhz. Alternatively, the motherboard might default to 2933 Mhz, requiring BIOS adjustments to enable XMP and set 3200 Mhz. If you're limited to 2933 Mhz, consider purchasing a SO-DIMM stick rated for at least 3000 Mhz—this will work fine at 2933 Mhz without issues. You can still opt for a cheaper stick and run both at 2933 Mhz or 3000 Mhz, as the performance gap between 3200 and 3000/2933 Mhz is minimal. So, don't necessarily need Samsung modules; just ensure your sticks meet the minimum voltage and speed requirements.