Check if your Samsung SSD works with ready-made systems.
Check if your Samsung SSD works with ready-made systems.
Hello, it wasn’t long ago when I purchased a ready-made PC for just $300. I’m curious if I could modify most components while still saving money—this feels like a trial run. I swapped the GTX 1050 2GB for a stronger GTX 1650 SUPER and upgraded the 350W PSU to a Corsair Grey 450W. I also added a 500GB Samsung SSD to the existing 1TB HDD. When I opened my PC, I noticed there’s no space for the SSD on top of the HDD, though I’m still checking if that’s a mistake. If anyone from 4Chan or Reddit can confirm compatibility and suggest a better placement, it would be a huge help.
You only need a working SATA power connector from your PSU and a SATA data port on your motherboard. Don’t stress about installation. Simply place the SSD inside or secure it with double-sided tape, or even drill a few holes if necessary.
Compatibility shouldn’t be a major concern. You should check if your power supply has an extra SATA port to connect the SSD, and you may need a cable to link it to your motherboard if it lacks a dedicated slot. If your case doesn’t have a designated area for an SSD, look for an open space on the bottom or side and secure the drive using double-sided tape.
With a SATA power cable and a SATA data connector on both the PSU and board, it should function. Unlike HDDs, SSDs don’t have moving parts, so you could install it using some DIY modifications or tape it down securely. It doesn’t matter much how you set it up.
PCPartPicker lists the components and their prices. The SSD mentioned is the Seagate BarraCuda 1 TB 3.5" 7200RPM internal drive priced at $45.89. It should be compatible with the system configuration you described.
Simply insert it and place it inside the case, using double-sided tape for extra stability if desired. 2.5" SSDs are extremely lightweight and lack moving parts, eliminating the requirement for a fixed position.