Check if your RAM supports the required specifications.
Check if your RAM supports the required specifications.
Hello, your question about DDR5 memory with a frequency above 5600MHz is understandable. The specifications you shared indicate a high-performance setup, and the RAM you found is designed for advanced applications. Your motherboard supports dual-channel memory architecture and the Intel Extreme Memory Profile (XMP), which allows it to utilize higher speeds safely. The RAM should work with your CPU and motherboard as long as it matches the supported specifications. Since it's non-ECC and un-buffered, ensure your system meets the stability requirements for such a fast memory type. You can proceed with confidence if everything aligns with the listed parameters.
Some components work at higher speeds like 6000MHz while others are designed for 2400Mhz, which means your memory stays compatible.
the board page shows all parts over 5600 with an OC label. applying XMP is simple and requires no effort. intel won’t need to take any blame if the overclock fails or the system becomes unstable. since you have an unlocked board, you’ll be limited to 5600Mhz even with a 13900K processor.
The warranty applies since the CPU isn't designed for 5600MHz with high RAM, but it's safe to use. Using XMP might pose risks if not compatible.
Avoid connecting 2 volts and it should work; otherwise it may shut down and start over if it's unstable.