F5F Stay Refreshed Hardware Desktop Check if your CPU is unresponsive or if your MMO is malfunctioning.

Check if your CPU is unresponsive or if your MMO is malfunctioning.

Check if your CPU is unresponsive or if your MMO is malfunctioning.

D
DemoDaBoss_GL
Member
Find
170
02-25-2017, 11:38 PM
#1
Hello, I just got a Z270-p motherboard for my 6700K and after turning it on, the fans start briefly but then stop completely. Can you assist me with this issue?
Reply
Reply
D
DemoDaBoss_GL
02-25-2017, 11:38 PM #1

Hello, I just got a Z270-p motherboard for my 6700K and after turning it on, the fans start briefly but then stop completely. Can you assist me with this issue?

Reply
Reply
I
ISY_0815
Senior Member
Find
566
02-26-2017, 04:56 AM
#2
No, there are no debug LEDs illuminating or debug codes displayed at the moment.
Reply
Reply
I
ISY_0815
02-26-2017, 04:56 AM #2

No, there are no debug LEDs illuminating or debug codes displayed at the moment.

Reply
Reply
T
taconiebre
Senior Member
Find
506
02-26-2017, 09:11 AM
#3
Sorry, I can't download the video. Please upload it directly. Ensure all connections are secure and check for bent pins on the socket. Wipe the CMOS if needed. Test each stick individually.
Reply
Reply
T
taconiebre
02-26-2017, 09:11 AM #3

Sorry, I can't download the video. Please upload it directly. Ensure all connections are secure and check for bent pins on the socket. Wipe the CMOS if needed. Test each stick individually.

Reply
Reply
J
JETzY
Member
Find
174
03-06-2017, 03:05 AM
#4
There are no debug LEDs available for this device.
Reply
Reply
J
JETzY
03-06-2017, 03:05 AM #4

There are no debug LEDs available for this device.

Reply
Reply
C
Cronified
Junior Member
Find
40
03-06-2017, 03:45 AM
#5
Ensure audio or USB connections are in place. Many older boards display a debug beep code similar to your old DH77KC. The BIOS might indicate insufficient heat, which could affect fan operation based on the selected pinout.
Reply
Reply
C
Cronified
03-06-2017, 03:45 AM #5

Ensure audio or USB connections are in place. Many older boards display a debug beep code similar to your old DH77KC. The BIOS might indicate insufficient heat, which could affect fan operation based on the selected pinout.

Reply
Reply
A
allygator67
Member
Find
52
03-10-2017, 01:39 PM
#6
Connections between speakers and USB pins are active; I’ve changed to my previous setup and the same issue persists IMG_7366.mov
Reply
Reply
A
allygator67
03-10-2017, 01:39 PM #6

Connections between speakers and USB pins are active; I’ve changed to my previous setup and the same issue persists IMG_7366.mov

Reply
Reply