F5F Stay Refreshed Power Users Overclocking Check if the Ryzen 3 1200 4GHz at 1.2V runs stably.

Check if the Ryzen 3 1200 4GHz at 1.2V runs stably.

Check if the Ryzen 3 1200 4GHz at 1.2V runs stably.

_
_LC_
Junior Member
17
02-02-2018, 02:57 AM
#1
So I just acquired a new Ryzen 3 1200 + Asus Prime X370 Pro (I bought this board since I plan to upgrade to R7 2700 or 3700 later).
I think I've managed to get a solid chip, but it seems uncertain because the stock cooler restricts me. After some time, I reach temperatures above 85°C at 4GHz with just 1.2V.
I haven't even considered lowering the voltage further.
I'm curious if I could achieve around 4.2GHz with a better cooler. What would be the maximum possible at 1.425V? Maybe 4.3 to 4.4 GHz? Hmm, not sure.
I'm really excited about getting a better cooler, but I don't have much left for one yet.
What do you think?
_
_LC_
02-02-2018, 02:57 AM #1

So I just acquired a new Ryzen 3 1200 + Asus Prime X370 Pro (I bought this board since I plan to upgrade to R7 2700 or 3700 later).
I think I've managed to get a solid chip, but it seems uncertain because the stock cooler restricts me. After some time, I reach temperatures above 85°C at 4GHz with just 1.2V.
I haven't even considered lowering the voltage further.
I'm curious if I could achieve around 4.2GHz with a better cooler. What would be the maximum possible at 1.425V? Maybe 4.3 to 4.4 GHz? Hmm, not sure.
I'm really excited about getting a better cooler, but I don't have much left for one yet.
What do you think?

C
charlieold8
Member
164
02-02-2018, 10:12 AM
#2
The Ryzen throttles at 75°C, yet you manage stability at 85°C for any duration. That said, I believe you won't reach stable 4GHz performance with any cooler. At 1.2 and 4Ghz at 85°C, temperatures will rise significantly to around 1.42. Still, you can experiment.
C
charlieold8
02-02-2018, 10:12 AM #2

The Ryzen throttles at 75°C, yet you manage stability at 85°C for any duration. That said, I believe you won't reach stable 4GHz performance with any cooler. At 1.2 and 4Ghz at 85°C, temperatures will rise significantly to around 1.42. Still, you can experiment.

B
betomblok
Member
196
02-05-2018, 04:40 AM
#3
There is no way of knowing until you try. It could go through the roof at 4.1Ghz. 4 Ghz stable is unusual. 4.1Ghz stable is rare. Anything higher would be exceedingly rare.
If you are hitting 85C. I would get a better cooler. If not to cool it down better. At least to reduce the noise.
B
betomblok
02-05-2018, 04:40 AM #3

There is no way of knowing until you try. It could go through the roof at 4.1Ghz. 4 Ghz stable is unusual. 4.1Ghz stable is rare. Anything higher would be exceedingly rare.
If you are hitting 85C. I would get a better cooler. If not to cool it down better. At least to reduce the noise.

J
JEFF_JEFFERSON
Senior Member
627
02-05-2018, 04:56 AM
#4
velocityg4 :
There is no way of knowing until you try. It could go through the roof at 4.1Ghz. 4 Ghz stable is unusual. 4.1Ghz stable is rare. Anything higher would be exceedingly rare.
If you are hitting 85C. I would get a better cooler. If not to cool it down better. At least to reduce the noise.
Yeah I should get a better cooler so I can see what I can get at 1.4V but about the noise. The stock cooler is seriously low noise. It's barely hearable and I never notice when it ramps up from 1.4k RPM to 2.8k RPM (which is the max RPM)
J
JEFF_JEFFERSON
02-05-2018, 04:56 AM #4

velocityg4 :
There is no way of knowing until you try. It could go through the roof at 4.1Ghz. 4 Ghz stable is unusual. 4.1Ghz stable is rare. Anything higher would be exceedingly rare.
If you are hitting 85C. I would get a better cooler. If not to cool it down better. At least to reduce the noise.
Yeah I should get a better cooler so I can see what I can get at 1.4V but about the noise. The stock cooler is seriously low noise. It's barely hearable and I never notice when it ramps up from 1.4k RPM to 2.8k RPM (which is the max RPM)

M
MONSTERmoose91
Senior Member
526
02-07-2018, 08:55 AM
#5
I should consider upgrading to a higher-quality cooler so I can observe the performance at 1.4V and manage the noise level. The regular cooler produces very little noise—it's almost inaudible—and I rarely feel the increase from 1.4k RPM to 2.8k RPM (the maximum). For better value, the Scythe Mugen 5 Rev B and Thermalright Macho Direct are solid choices. Their cooling performance is close to Noctua NH-D15 but at a lower price. The Scythe Mugen 5 Rev B offers slightly improved cooling than the Thermalright and is nearly as good as the Noctua. All options are quite similar, especially when considering overclocked PWM data. This is the most relevant set for general use.
https://www.tweaktown.com/reviews/8320/s...ndex6.html

Don't waste money on inferior coolers; their benefits don't outweigh the price.
M
MONSTERmoose91
02-07-2018, 08:55 AM #5

I should consider upgrading to a higher-quality cooler so I can observe the performance at 1.4V and manage the noise level. The regular cooler produces very little noise—it's almost inaudible—and I rarely feel the increase from 1.4k RPM to 2.8k RPM (the maximum). For better value, the Scythe Mugen 5 Rev B and Thermalright Macho Direct are solid choices. Their cooling performance is close to Noctua NH-D15 but at a lower price. The Scythe Mugen 5 Rev B offers slightly improved cooling than the Thermalright and is nearly as good as the Noctua. All options are quite similar, especially when considering overclocked PWM data. This is the most relevant set for general use.
https://www.tweaktown.com/reviews/8320/s...ndex6.html

Don't waste money on inferior coolers; their benefits don't outweigh the price.

K
KyleAlan
Junior Member
43
02-14-2018, 08:54 AM
#6
Velocityg4 shared their thoughts on cooling options, noting the stock cooler is very quiet and performs well at higher speeds. They recommend the Scythe Mugen 5 Rev B and Thermalright Macho Direct as solid choices, comparing them favorably to Noctua models. The reviews highlight close performance with similar noise levels. They advise against cheaper alternatives and suggest the Wraith Stealth cooler is a reasonable pick for their needs.
K
KyleAlan
02-14-2018, 08:54 AM #6

Velocityg4 shared their thoughts on cooling options, noting the stock cooler is very quiet and performs well at higher speeds. They recommend the Scythe Mugen 5 Rev B and Thermalright Macho Direct as solid choices, comparing them favorably to Noctua models. The reviews highlight close performance with similar noise levels. They advise against cheaper alternatives and suggest the Wraith Stealth cooler is a reasonable pick for their needs.

S
Sambar_Person
Junior Member
12
02-15-2018, 06:38 PM
#7
The Ryzen throttles at 75°C, yet you manage stability at 85°C for any duration. That said, I believe you won't reach stable 4GHz performance with any cooler. At 1.2 and 4Ghz at 85°C, temperatures will rise significantly to around 1.42. Still, you can experiment.
S
Sambar_Person
02-15-2018, 06:38 PM #7

The Ryzen throttles at 75°C, yet you manage stability at 85°C for any duration. That said, I believe you won't reach stable 4GHz performance with any cooler. At 1.2 and 4Ghz at 85°C, temperatures will rise significantly to around 1.42. Still, you can experiment.

T
Texas1047
Posting Freak
889
02-17-2018, 06:20 AM
#8
Loadedaxe explained his experience with CPU throttling and temperature management under different cooling setups.
T
Texas1047
02-17-2018, 06:20 AM #8

Loadedaxe explained his experience with CPU throttling and temperature management under different cooling setups.