Check if the MSI B450M supports dual GPU and NVMe drives together.

F5F Stay Refreshed Hardware Desktop Check if the MSI B450M supports dual GPU and NVMe drives together.

Sky319
Member

10-05-2016, 07:50 PM

Hi! Here’s what might be going on: Your MSI card with the HD4350 GPU and XPG S11 240Gb NVMe is working fine when using the Corsair MP600, but not when you swap the other NVMe drive. It could be a compatibility issue or a mismatch in the drivers. Try connecting it to a different M.2 slot or checking the driver settings—sometimes switching slots helps! Thanks for reaching out.

Sky319

10-05-2016, 07:50 PM #1

Lithiumi
Junior Member

10-05-2016, 10:06 PM

Check the label on your motherboard for slot assignments. Look for SSD slots marked with numbers or letters. Any device plugged into the SATA ports will be connected to one of these slots.

Lithiumi

10-05-2016, 10:06 PM #2

Check the label on your motherboard for slot assignments. Look for SSD slots marked with numbers or letters. Any device plugged into the SATA ports will be connected to one of these slots.

funnyhatter
Junior Member

10-05-2016, 11:23 PM

Placing the GPU in the first slot works well.

funnyhatter

10-05-2016, 11:23 PM #3

Placing the GPU in the first slot works well.

RockyRS
Member

10-06-2016, 08:05 AM

With two NVMe compatible M.2 ports ready, there should be no issue. Make sure the GPU goes into the highest x16 slot.

RockyRS

10-06-2016, 08:05 AM #4

With two NVMe compatible M.2 ports ready, there should be no issue. Make sure the GPU goes into the highest x16 slot.

allnaday
Junior Member

10-08-2016, 07:58 AM

XPG with OS installed in the first slot, Corsair in the second.

allnaday

10-08-2016, 07:58 AM #5

XPG with OS installed in the first slot, Corsair in the second.

Esmaroda
Member

10-16-2016, 07:16 AM

GPU was placed on the primary PCIe slot; I attempted to install it in the alternate PCI but it didn’t work.

Esmaroda

10-16-2016, 07:16 AM #6

GPU was placed on the primary PCIe slot; I attempted to install it in the alternate PCI but it didn’t work.

MistaOmega
Member

10-22-2016, 03:06 AM

The board only allows PCIe 2.0 x4 in the second M.2 port; it seems MSI didn’t anticipate placing a PCIe 4.0 device there. Consider swapping their locations.

MistaOmega

10-22-2016, 03:06 AM #7

The board only allows PCIe 2.0 x4 in the second M.2 port; it seems MSI didn’t anticipate placing a PCIe 4.0 device there. Consider swapping their locations.