Check if the CPU is the issue.
Check if the CPU is the issue.
Hi everybody, I'm hoping y'all can help me with my problem that I can't seem to solve. I'm doing a budget gaming build and I can't figure out what the problem is. This is my 2nd build, didn't have any problems the first time a few years back. Parts list: SilverStone ET750-G 750W 80Plus Essential Power Supply Asus TUF B450M-PLUS Gaming AM4 mATX Motherboard AMD Ryzen 5 2600 6-Core Socket AM4 3.4GHz CPU Processor Crucial 4GB DDR4 2400MHz Desktop Memory Cooler Master MasterBox NR400 Tempered Glass mATX Compact Case Sandisk 128gb SSD Steps I've taken: reduced down to CPU, 1 stick ram, 1 ssd I've already warranty returned the MOBO twice (1st time it was a bad board, 2nd time they say it's fine). I've tested the SSD in an enclosure and it works fine in there. I've used 3 different ram sticks. Having tested the SSD, been told the MOBO is fine and having 3x different ram I feel like the only component left is the CPU. On boot, It's giving a 1 long 4 short beep code which equals hardware component failure (that's it - no other items mentioned in the manual) With dealing with the return process for the MOBO and etc... this build is going on 3 months Link to photos and video. Any help would be appreciated.
It won’t show any output, which might trigger the error code. Certain boards can operate without a GPU, though then control must come via remote connection.
That's correct. The last build I performed included onboard graphics, which helped me adapt during troubleshooting when the MOBO wasn't functioning properly. It was advised to remove the GPU to simplify the process. Appreciate your response!
Great, thanks for the explanation. The issue was resolved. I also have an additional 32GB saved but wasn’t using it before. Appreciate the help!