F5F Stay Refreshed Hardware Desktop Changing the RAM leads to freezing during startup.

Changing the RAM leads to freezing during startup.

Changing the RAM leads to freezing during startup.

E
Eusebio06
Senior Member
595
03-30-2017, 10:55 PM
#1
Hey Everyone! First post here, so it had to be a troubleshooting post Tongue So I decided to upgrade the RAM in my computer, as I'm currently using 8gb, and I wanted to take advantage of using duel channel. I bought 16gb (8gbx2) of corsair vengance LPX DDR4 2666MHz to replace my current patriot 8gb 2666MHz. When I installed it, after showing the initial ASUS logo, it shows the loading animation then freezes. It either resets itself, or just gets stuck until I reset it manually. I've updated the BIOS, tried to remove dust from ram slots by blowing into it and using compresses air,and Taken out the battery but it doesn't seem to work. I have also tried running each stick of ram by itself, and both work fine individually. It's just whenever I have both in at the same time, I run in to this issue. If someone has any Idea as to what I can do to solve this issue, that'd be greatly appreciated! My specs are as follows, MoBo:ASUS Prime A320M-E CPU: Ryzen 2200g GPU: RX 580 8GB PSU: Thermaltake 500w SSD: Crucial 256gb
E
Eusebio06
03-30-2017, 10:55 PM #1

Hey Everyone! First post here, so it had to be a troubleshooting post Tongue So I decided to upgrade the RAM in my computer, as I'm currently using 8gb, and I wanted to take advantage of using duel channel. I bought 16gb (8gbx2) of corsair vengance LPX DDR4 2666MHz to replace my current patriot 8gb 2666MHz. When I installed it, after showing the initial ASUS logo, it shows the loading animation then freezes. It either resets itself, or just gets stuck until I reset it manually. I've updated the BIOS, tried to remove dust from ram slots by blowing into it and using compresses air,and Taken out the battery but it doesn't seem to work. I have also tried running each stick of ram by itself, and both work fine individually. It's just whenever I have both in at the same time, I run in to this issue. If someone has any Idea as to what I can do to solve this issue, that'd be greatly appreciated! My specs are as follows, MoBo:ASUS Prime A320M-E CPU: Ryzen 2200g GPU: RX 580 8GB PSU: Thermaltake 500w SSD: Crucial 256gb

R
Rayack
Senior Member
539
04-03-2017, 05:39 AM
#2
Can I restore the BIOS to its original settings? It seems like the new RAM might be overclocked and not compatible with the current configuration.
R
Rayack
04-03-2017, 05:39 AM #2

Can I restore the BIOS to its original settings? It seems like the new RAM might be overclocked and not compatible with the current configuration.

M
MrKacapaper
Junior Member
35
04-05-2017, 01:49 AM
#3
I've attempted to reset to the default settings, but it didn't function as expected.
M
MrKacapaper
04-05-2017, 01:49 AM #3

I've attempted to reset to the default settings, but it didn't function as expected.