Cat5E cables are designed for high-speed data transmission.
Cat5E cables are designed for high-speed data transmission.
I have two distinct Ethernet cables passing through my walls. I need to solder the ends, but the colors differ on each pair. Cable 1 features Blue and Blue+White twisted together, Green and Green+White twisted together, Orangey Gold, White, Brown, and Black+White twisted together. Cable 2 has Brown, Black, Orange, Light Blue, Light Green, Blue, Green, and Very White/Grey (almost white). Which colors should match which cable?
Avoid joining network cables directly. Connect the ends first, then use a female-to-female adapter.
It really doesn't matter, the ANSI/TIA-568 standard only specifies cable colors for your cable 1. Just match the colors on cable 1 with those on cable 2. You're free to arrange the cabling as you like if you keep track of color connections at both ends, but using a consistent T568A or T568B scheme makes it easier to remember.
T568A and T568B differences in performance are minimal. The main concern lies in proper installation. Using a crossover cable—where one end is T568A and the other T568B—will not function correctly, as it’s meant for connecting devices of the same type. Crossover cables are handy for linking switches together but not for PC-to-switch connections. For everyday use, ensure both cables match in type. The colored stripes indicate specific wiring: grey is orange + white, light green is green + white, light blue is blue + white, and black is brown + white.
This statement is incorrect because mixing pairs from various pins disrupts the UTP twisted pair's ability to reduce crosstalk. It applies to current setups but not modern standards like auto MDI/MDIX in 802.3ab, which adjusts NIC settings for crossovers. This isn't a Cat5e cable. Avoid connecting network cables directly.
It's accurate (and I was taken aback that anyone caught on, since my responses tend to be thorough). But it should still function.
Hello. Thank you all for your support. It's actually an ethernet cable, the same speed as other Cat5E cables I have, but it is not labeled so I have way of knowing what it is. I've been using Cable 2 as an ethernet cable for years with no problems, and it was run though my wall from the main router to my office. But now I have an extension on my house and I need to connect these 2 cables which have been run inside my walls together. I need to solder these together no matter what, so what ends of each cable connect to which?
We're saying no to soldering. It's not worth it. Instead, connect both ends to an RJ-45 and use a female-to-female coupler. These can be installed in walls if necessary. If you really want to go that route, make sure each cable matches the other exactly, in the same sequence.