Case fans aren't functioning, but an AIO is working—no further details provided.
Case fans aren't functioning, but an AIO is working—no further details provided.
I'm assembling a new PC with these components. The fans aren't working, but the RGB lights are fine. The system isn't responding, but the graphics card functions. I connected the cable directly to the GPU instead of the motherboard. Need assistance.
On the left side of your motherboard, find a 24-pin connector shaped like two 12-pins. This connects to the power supply. On the upper part, locate a 4-pin and an 8-pin connector side by side, both linked to the power supply for the CPU. Near the graphics card, there’s a 12-pin connector (2x6) that also needs power connection. Attach the ARGB cables for your light wings—three pins with a gap in between. If you have a splitter included, use it. Link the AIO pump cable to the AIO_PUMP port on the bottom right. Mount the fans to the CPU_FAN and possibly the CPU_OPT connector on top. Plug the fans’ 4-pin cables into CHA_FAN1, CHA_FAN2, and CHA_FAN3. Attach your case connectors at the bottom right. Power it up. For reference, see the provided manual: E19403_PRIME_Z690-P_WIFI_D4_V2_UM_WEB.pdf (asus.com)
Inside the case fan connectors
For the installation area
To secure the components properly