Card with Hyper M.2 Gen 4 SSD missing from BIOS settings
Card with Hyper M.2 Gen 4 SSD missing from BIOS settings
Hyper M.2 x16 Gen 4 card equipped with two 970 EVO plus a 500 GB SSD. Running on an i7-9700K processor with ASUS z390-P motherboard. Installed in the first PCIe x16 slot; Hyper M.2 is active in BIOS. Attempting RAID setup, but SSD isn't listed in BIOS. Need advice or assistance?
Your GPU is installed on your device. Let me know if you need details about its location.
Usually you should perform a backup in the OS, make use of storage if you're on Windows. The Intel mainstream platform doesn't support volume or RAID on the BIOS (and you really shouldn't want to use that either)
You're facing an issue where RAID 0 isn't combining the speeds of your drives. This usually happens if the RAID controller or software isn't properly configured. Check your RAID settings, ensure all drives are recognized correctly, and verify that the RAID level supports full performance. If the problem persists, consult your hardware documentation or support team.