Can't fit together RTX 5080, Ryzen 7, X870E Aorus Elite, Wi-Fi 7 version 1.2 and super fast RAM.
Can't fit together RTX 5080, Ryzen 7, X870E Aorus Elite, Wi-Fi 7 version 1.2 and super fast RAM.
Hello, do you have a specialist or IT expert who can accurately address this situation and give advice based on confirmed solutions rather than assumptions? I’ve got a detailed case for you. After months of adjusting BIOS settings and trying various configurations, the issue remains unresolved. Windows 11 Pro often freezes, restarts, or shows brief glitches within ten seconds after logging in—even during intensive tasks like gaming or benchmarking. While forums suggest it’s linked to the RTX 5080, I’ve gathered my PC specs and would be happy to help fix it if you’re willing. Thank you very much for your support!
Appreciate your prompt reply, though not every time. Around 33% of the time I’d estimate. Most often after a cold boot in Windows 11, the freeze occurs within 10 seconds after the login screen appears—no matter what I do. About 10% it freezes in the BIOS instead when trying to adjust settings; if that happens, common motherboard errors appear as D9 or 01. Otherwise, when everything seems normal, we successfully run A0 code, and after a restart it usually works fine for hours.
The issues began at a specific point. Has this been a concern since you initially set up the device? Or has everything worked smoothly for some time? Reviewing the component list suggests this is likely a brand-new unit rather than an upgraded version. Is the Windows update file older than the operating system itself, or is it the latest release? Ensure you're using the freshly downloaded installation package. Avoid the built-in reset feature—it usually doesn't resolve the problem. If your current Windows install is brand new and wasn't transferred from another machine, consider using a different storage drive.
I believe the main problem lies here—please switch to a completely different RAM module and stick to the suggested configurations. (Alternatively, consider using XMP or maintain the original stock settings.)
Thank you for the updates. The issue begins right after logging in, and if nothing appears within ten seconds, everything is fine for the duration. Even during long sessions or tough games, it works. This started from the initial setup with Windows 11 Pro 64-bit, which I downloaded from Microsoft. I made a bootable pendrive on the second machine's RAM. I attempted XMP but disabled all settings now. My system uses an AMD Ryzen processor that supports up to 5600 MHz, while the default BIOS sets it to 4800 MHz. I’ve turned off tweaks like EXPO/XMP. I also tried a Kingston DDR5 KF580C38-16 2x 16GB RAM with 8000 MHz speed, but it only supports up to 5600 MHz. One freeze occurred after 15 restarts.
Operating above 6000MHz on Ryzen is a significant risk. High-frequency RAM doesn't perform well at such low speeds. Stick to a standard configuration—avoid exotic kits and aim for around 30ms latency. This will give you the best speed and stability. You're likely using RAM that doesn't meet specifications, and I've faced this issue before. It might work, but it dislikes these settings. The safest choice is regular RAM. Even at 8000MHz, performance drops compared to the 6000MHz model because of timing mismatches with the memory clock.
Thanks in advance. To clarify: a) My 8000 MHz RAM works fine on the mainboard for Ryzen, but it feels too fast for the chipset, even though the board supports it. Is that accurate? b) Even at 4800 MHz, it still seems sluggish because it doesn’t match the RAM’s capabilities. Are you experiencing freezing issues? Would you like recommendations for the best RAM that fits your Ryzen 7 9800 X3D and AORUS X870E Wi-Fi 7 Elite Ver 1.2? I’m planning to buy from this shop—website www.galaxus.ch. You mentioned upgrading the PCIe settings in BIOS from auto to Gen4 instead of Gen5; that actually helped stability a lot, though it’s still not ideal.
I believe the issue was related to RAM. I turned off XMP and ran at 4800 MHz, then activated the BIOS option called Gear Down Mode, switching it from auto to enabled. After performing 10 resets, it worked! Wow, that should fix it now... Thanks a lot for your help! I think Gear Down Mode relates to command rate, so I’ll test with Gen5 for RTX and a higher RAM speed next.