Board indicates two 8-pin connectors for the processor
Board indicates two 8-pin connectors for the processor
For pushing a 13900K at full capacity, I’d recommend two chips because that specific part can exceed 400W when pushed hard (close to the maximum allowed by Molex for an 8-pin connector). If you’re only running other components or keeping it at stock with E cores off, a single 8-pin should work fine.
If you have the budget for a 500 dollar plus motherboard, you can invest in a reliable power supply unit or at least a second cable for your existing PSU. Most good modular PSUs come with two 8-pin connectors or allow dual connections. Yes, I’d consider it if you intend to run a 13900k with any level of overclocking. If not, skip the premium motherboard. High-end boards usually lack strong support, attract fewer buyers, and receive less attention because problems impact far fewer users than popular mid-range models. Also, the motherboard itself doesn’t affect performance—choose it based on what features matter most (like NVMe ports or SATA/PCIe options).
Psu would have to be pretty bad to only have one 8pin. No reason not to use them both.
You can afford to splurge on a high-end power supply that delivers extra efficiency and lasts years. For serious overclocking, opt for a 2DIMM board such as the Z6/790 Dark, though you may hit IMC limits if you push speeds above 8500. If you need extra ports, invest in a board designed for content creators—top-tier options aren’t just for OC enthusiasts and often come with solid build quality, not just flashy features.