Board appears to reset BCLK overclock each time the computer starts up and shuts down.
Board appears to reset BCLK overclock each time the computer starts up and shuts down.
Hello, your recent attempt to boost the I7 8700 non-K to 102.98 has yielded some positive benchmark results with stable temperatures. However, you're experiencing longer boot and reboot times, with the PC restarting twice during startup—similar to when you first applied the overclock. Despite changing only the BCLK value and enabling XMP in BIOS, the issue persists. You've also reset default settings and kept XMP disabled, yet performance remains unchanged. The specs confirm it's within expected ranges for a 102.98 MHz boost. It seems the system is still adapting to the new frequency, which can cause temporary instability. This isn't unusual, but it does raise questions about long-term stability. I recommend monitoring temperatures closely and ensuring your cooling solution handles the increased load. If the problem continues, consider checking BIOS updates or consulting a technician.
BCLK influences the entire system, even your storage. It's possible something gets disrupted. The OC should not be used once you've reset; have you considered clearing the CMOS?
Without a clock boost, the restart lasts about 30 seconds. Using an OC version causes delays exceeding a minute since the system powers on and shuts off multiple times during each boot or reset, not just once after saving and applying the boost.