Best configurations for 2.4 and 5 GHz
Best configurations for 2.4 and 5 GHz
To boost your Wi-Fi performance, adjust settings for both devices based on their usage patterns. For your PC and TV via Ethernet, ensure stable connections and consider updating firmware. On your iPhone and Nintendo Switch, optimize network settings and disable background data when not in use. If your boyfriend visits, set up a secondary hotspot or switch to a wired connection for consistent speeds.
There are available tools that identify less busy Wi-Fi channels. You can set your router to favor a specific channel away from crowded networks or areas with weaker signals. For instance, a simple web search reveals an app: https://apps.microsoft.com/store/detail/...BLGGH33N0N. On your device, the example used is: https://play.google.com/store/apps/detai...l=en&gl=US. Operating at 5 GHz means the router selects a channel at initial setup rather than adjusting daily or hourly. This can happen if power interruptions cause delays, leading the router to choose a less optimal channel. If you don’t use 2.4 GHz devices, consider disabling that frequency for better performance.
Optimize refers to improving performance and stability in networking devices. You're asking whether you need seamless connectivity, maximum speed, or compatibility with older systems despite potential reliability trade-offs. Most routers offer limited choices, making it hard to give a one-size-fits-all solution.
Be mindful that 2.4g offers a broader coverage area compared to 5ghz and can pass through walls more effectively. Even with all 5ghz devices nearby, they may switch to 2.4ghz when they're far from your router or AP. This tends to work well in apartments or standard homes, but larger or thickly built properties might cause problems. Personally, I usually face 5ghz issues outside my house while 2.4ghz performs adequately (just slower).
You've chosen to keep both devices online, so you'll maintain the 2.4 GHz frequency. This gives you access to a broader range of networks and better coverage.
Well for starters, if there are other 2.4Ghz networks in range then the router should NOT be using channel 8 at 40Mhz. Also be sure to select your country or it could be broadcasting at illegal power levels. Personally on 2.4Ghz I'd manually try 1, 6 or 11 and only at 20Mhz unless there are no networks at all in range. Channel 8 on 40Mhz will interfere with the entire band and even if it works for you, cause major headaches for everyone else.