F5F Stay Refreshed Hardware Desktop B650 Aorus Elite AX Rev. 1.0 ACPI BIOS issue during Windows 10 installation.

B650 Aorus Elite AX Rev. 1.0 ACPI BIOS issue during Windows 10 installation.

B650 Aorus Elite AX Rev. 1.0 ACPI BIOS issue during Windows 10 installation.

M
mineuout482
Posting Freak
812
06-30-2022, 04:36 AM
#1
I've been dealing with this board lately. It initially wouldn't let anything post, but now I'm checking my Zorin OS setup. The system recognizes all my connected drives, though RAM appears normal. When trying XMP mode, it causes boot loops and blocks me from entering BIOS to disable it. That means I have to perform a full flash and reset the board. Most importantly, I'm planning a clean Windows 10 install. My hardware specs are listed below:

- AMD Ryzen 5 7600x with Corsair Vengeance 32GB (2x16GB) at 5200MHz
- Gigabyte RTX 3060 12GB using 3D NVMe PCIe 3.0
- Sandisk 3D NVMe PCIe 3.0 1TB (original Windows 10 boot drive)
- WD Black PCIe 4.0 2TB Crucial P3 4TB PCIe 3.0
- Seagate Barracuda 8TB Samsung 860 Evo Plus SATA SSD (used for booting Zorin OS)

I haven’t changed any components. Everything functions with both Windows and Zorin OS, including the XMP profile before the POST issue began. My main concern is a fresh Windows 10 install—why would that cause problems?

I’m currently using an AMD Ryzen 5 7600x with a 5200MHz CPU, a 12GB RAM module, and a 1TB NVMe SSD. The BIOS is set to F22b for this board revision. I’ve tried isolating every part to see if the issue lies elsewhere, but so far no specific fix works.

I moved the boot drive to a spare laptop, which successfully booted after recovery. It guided me through setup and eventually logged in. Before that, I tested the installation media on that laptop—it worked perfectly, installing Windows without issues.

I’m seeking advice on adjusting any ACPI settings to resolve these persistent errors. I might need to return for a repair or return it if something failed after over a year. Right now, I’m leaning toward giving Windows a chance and hoping the problem lies in the BIOS or hardware quirks.
M
mineuout482
06-30-2022, 04:36 AM #1

I've been dealing with this board lately. It initially wouldn't let anything post, but now I'm checking my Zorin OS setup. The system recognizes all my connected drives, though RAM appears normal. When trying XMP mode, it causes boot loops and blocks me from entering BIOS to disable it. That means I have to perform a full flash and reset the board. Most importantly, I'm planning a clean Windows 10 install. My hardware specs are listed below:

- AMD Ryzen 5 7600x with Corsair Vengeance 32GB (2x16GB) at 5200MHz
- Gigabyte RTX 3060 12GB using 3D NVMe PCIe 3.0
- Sandisk 3D NVMe PCIe 3.0 1TB (original Windows 10 boot drive)
- WD Black PCIe 4.0 2TB Crucial P3 4TB PCIe 3.0
- Seagate Barracuda 8TB Samsung 860 Evo Plus SATA SSD (used for booting Zorin OS)

I haven’t changed any components. Everything functions with both Windows and Zorin OS, including the XMP profile before the POST issue began. My main concern is a fresh Windows 10 install—why would that cause problems?

I’m currently using an AMD Ryzen 5 7600x with a 5200MHz CPU, a 12GB RAM module, and a 1TB NVMe SSD. The BIOS is set to F22b for this board revision. I’ve tried isolating every part to see if the issue lies elsewhere, but so far no specific fix works.

I moved the boot drive to a spare laptop, which successfully booted after recovery. It guided me through setup and eventually logged in. Before that, I tested the installation media on that laptop—it worked perfectly, installing Windows without issues.

I’m seeking advice on adjusting any ACPI settings to resolve these persistent errors. I might need to return for a repair or return it if something failed after over a year. Right now, I’m leaning toward giving Windows a chance and hoping the problem lies in the BIOS or hardware quirks.