ATX case with ITX motherboard installed

leeviah
Member

09-10-2023, 09:09 PM

You have an ATX chassis with an ATX board inside, and you want to swap it out for an ITX board. The case you’re using is the Raidmax Smilodon.

leeviah

09-10-2023, 09:09 PM #1

You have an ATX chassis with an ATX board inside, and you want to swap it out for an ITX board. The case you’re using is the Raidmax Smilodon.

MGS_MGS
Junior Member

09-18-2023, 04:39 AM

Adjust the elements that don’t match.

MGS_MGS

09-18-2023, 04:39 AM #2

Adjust the elements that don’t match.

ASAAD_3D
Member

199

09-18-2023, 06:14 AM

In the case, remove any unnecessary sections or items.

ASAAD_3D

09-18-2023, 06:14 AM #3

In the case, remove any unnecessary sections or items.

SIGNORET
Member

160

09-21-2023, 02:36 AM

Check if the screws fasten directly to the standoffs. If so, detach them carefully. For standoffs that hold screws, follow the removal steps and consider methods to secure them back after taking off.

SIGNORET

09-21-2023, 02:36 AM #4

Check if the screws fasten directly to the standoffs. If so, detach them carefully. For standoffs that hold screws, follow the removal steps and consider methods to secure them back after taking off.

GeorgeeeHD
Junior Member

09-24-2023, 10:07 AM

They're definitely stuck in a tough spot.

GeorgeeeHD

09-24-2023, 10:07 AM #5

They're definitely stuck in a tough spot.

FrenchTost
Member

204

09-26-2023, 12:24 AM

Great! Let's get started.

FrenchTost

09-26-2023, 12:24 AM #6

Great! Let's get started.

jbradical123
Member

131

09-28-2023, 10:19 AM

The connections are usually just fastened directly onto the housing. When they’re welded in or bolted on, you’ll need to install your own parts and drill any necessary holes if those aren’t already present.

jbradical123

09-28-2023, 10:19 AM #7