F5F Stay Refreshed Hardware Desktop ASUS X570 BIOS version 4004 / AMD AM4 AGESA V2 PI 1.2.0.6b

ASUS X570 BIOS version 4004 / AMD AM4 AGESA V2 PI 1.2.0.6b

ASUS X570 BIOS version 4004 / AMD AM4 AGESA V2 PI 1.2.0.6b

D
Dialatz
Member
187
01-16-2020, 08:19 PM
#1
Are there any others who have obtained the newest 4004 BIOS for their Asus X570 boards? I recently upgraded my WS X570 Pro ACE with a Ryzen 5950x this morning. Performance metrics remain stable—Cinebench and Geekbench scores are only marginally better under load, with a slight increase in stock voltage and higher temperatures. With PBO2 activated at the recommended limits and a Curve optimiser set to -10, -15, and -20, I’m achieving 4.3GHz across all cores and 5GHz on single cores, matching the performance of BIOS 3904. The maximum temperature stays around 75°C. So far, no instability or unusual behavior has been observed.
D
Dialatz
01-16-2020, 08:19 PM #1

Are there any others who have obtained the newest 4004 BIOS for their Asus X570 boards? I recently upgraded my WS X570 Pro ACE with a Ryzen 5950x this morning. Performance metrics remain stable—Cinebench and Geekbench scores are only marginally better under load, with a slight increase in stock voltage and higher temperatures. With PBO2 activated at the recommended limits and a Curve optimiser set to -10, -15, and -20, I’m achieving 4.3GHz across all cores and 5GHz on single cores, matching the performance of BIOS 3904. The maximum temperature stays around 75°C. So far, no instability or unusual behavior has been observed.

B
BlackVeilEwan
Member
138
01-17-2020, 01:26 AM
#2
Audio stuttering happens occasionally, though it's rare. I've submitted a report through the Windows 11 Feedback Hub.
B
BlackVeilEwan
01-17-2020, 01:26 AM #2

Audio stuttering happens occasionally, though it's rare. I've submitted a report through the Windows 11 Feedback Hub.

D
DropletJ
Junior Member
44
01-21-2020, 10:59 AM
#3
Looks reliable for me. Previously struggled with PBO but this model holds up at 4.5GHz across all cores with a consistent -10 curve tweak. The CPU caps at around 4.9GHz on single core, which has been the case since launch. No audio issues with my Sound Blaster ZxR, so I can't discuss stuttering. This setup uses an Asus X570 Dark Hero and 5950X.
D
DropletJ
01-21-2020, 10:59 AM #3

Looks reliable for me. Previously struggled with PBO but this model holds up at 4.5GHz across all cores with a consistent -10 curve tweak. The CPU caps at around 4.9GHz on single core, which has been the case since launch. No audio issues with my Sound Blaster ZxR, so I can't discuss stuttering. This setup uses an Asus X570 Dark Hero and 5950X.

T
theawesomepain
Junior Member
3
01-21-2020, 03:23 PM
#4
It got upgraded recently and since then things have gone completely haywire. The system is now super unstable, keeps crashing and restarting, and I’m not even managing the original configuration. I turned off PBO too. My CPU is a 3700x, so I really need to roll back before it’s too late. Can’t rely on my web interface anymore.
T
theawesomepain
01-21-2020, 03:23 PM #4

It got upgraded recently and since then things have gone completely haywire. The system is now super unstable, keeps crashing and restarting, and I’m not even managing the original configuration. I turned off PBO too. My CPU is a 3700x, so I really need to roll back before it’s too late. Can’t rely on my web interface anymore.

S
SkyCrowzK
Member
189
01-21-2020, 03:35 PM
#5
I installed the newest 4101 A BIOS and it’s working well for me (I always reset CMOS after updating to set defaults and refresh, not sure if that matters). Scored a few hundred points in Cinebench and PBO improved slightly. The fTPM still lags but I know fixes won’t be available until May.
S
SkyCrowzK
01-21-2020, 03:35 PM #5

I installed the newest 4101 A BIOS and it’s working well for me (I always reset CMOS after updating to set defaults and refresh, not sure if that matters). Scored a few hundred points in Cinebench and PBO improved slightly. The fTPM still lags but I know fixes won’t be available until May.

V
Voorbips
Member
63
01-22-2020, 04:30 PM
#6
I switched to ComboAm4v2PI 1.2.0.6c about a week ago for my new 5900x setup and faced several random problems, so I went back to 1.2.0.3b which has worked well on my X570 Unify.
V
Voorbips
01-22-2020, 04:30 PM #6

I switched to ComboAm4v2PI 1.2.0.6c about a week ago for my new 5900x setup and faced several random problems, so I went back to 1.2.0.3b which has worked well on my X570 Unify.