F5F Stay Refreshed Hardware Desktop Asus ROG B550-F paired with 3200MHZ RAM and 32GB memory support.

Asus ROG B550-F paired with 3200MHZ RAM and 32GB memory support.

Asus ROG B550-F paired with 3200MHZ RAM and 32GB memory support.

Pages (2): 1 2 Next
C
crafty70
Member
90
01-22-2020, 10:21 PM
#1
So guys i have 2X CMW16GX4M2C3200C16 as ram 3200mhz so total of 4 sticks When i enable DOCP in bios my system does not post when i remove the ram and insert one it boots Why is this? can i overclock manually? and how ? what numbers? at stock it runs 2133mhz so its not using max performance Is there a difference if i use 2X8GB CMW16GX4M2C3200C16 or 4x8GB CMW32GX4M4C3200C16
C
crafty70
01-22-2020, 10:21 PM #1

So guys i have 2X CMW16GX4M2C3200C16 as ram 3200mhz so total of 4 sticks When i enable DOCP in bios my system does not post when i remove the ram and insert one it boots Why is this? can i overclock manually? and how ? what numbers? at stock it runs 2133mhz so its not using max performance Is there a difference if i use 2X8GB CMW16GX4M2C3200C16 or 4x8GB CMW32GX4M4C3200C16

S
SayNoToNWO
Posting Freak
879
01-22-2020, 10:55 PM
#2
Adjust the BIOS parameters to 1.1 Dram with a value of 1.35. Test booting at 3200 MHz. If successful, run memtest86 or OCCT for stability verification. Higher SOs improve performance, ensuring consistent bandwidth and reducing stress on the IMC and interconnect. Good luck!
S
SayNoToNWO
01-22-2020, 10:55 PM #2

Adjust the BIOS parameters to 1.1 Dram with a value of 1.35. Test booting at 3200 MHz. If successful, run memtest86 or OCCT for stability verification. Higher SOs improve performance, ensuring consistent bandwidth and reducing stress on the IMC and interconnect. Good luck!

B
Browen1000
Member
224
01-23-2020, 09:49 PM
#3
It seems your CPU might not be performing as expected at 3200MHz across four drives. Consider adjusting the SOC voltage to roughly 1.1 to 1.125V, following the advice from @TofuHaroto.
B
Browen1000
01-23-2020, 09:49 PM #3

It seems your CPU might not be performing as expected at 3200MHz across four drives. Consider adjusting the SOC voltage to roughly 1.1 to 1.125V, following the advice from @TofuHaroto.

T
Tman302
Junior Member
13
01-24-2020, 05:36 AM
#4
I'll check if the latest bios is available.
T
Tman302
01-24-2020, 05:36 AM #4

I'll check if the latest bios is available.

B
BobDerMaurer
Member
176
01-24-2020, 10:38 AM
#5
Give it a shot with the other options listed. Success is within reach.
B
BobDerMaurer
01-24-2020, 10:38 AM #5

Give it a shot with the other options listed. Success is within reach.

C
CatsGoNyaa
Member
50
01-24-2020, 04:33 PM
#6
No, you don't need to turn it on right now.
C
CatsGoNyaa
01-24-2020, 04:33 PM #6

No, you don't need to turn it on right now.

I
ItsRick
Junior Member
15
01-25-2020, 03:10 PM
#7
The color changed because of a reaction or exposure.
I
ItsRick
01-25-2020, 03:10 PM #7

The color changed because of a reaction or exposure.

X
xxdreaaxx
Junior Member
43
01-25-2020, 04:51 PM
#8
After configuring the SOC to 1.1 and DRAM to 1.35, attempt to use docp.
X
xxdreaaxx
01-25-2020, 04:51 PM #8

After configuring the SOC to 1.1 and DRAM to 1.35, attempt to use docp.

Q
QuRzy
Member
149
01-25-2020, 05:05 PM
#9
The system has started; manual testing is now running. Should I turn on docp beforehand?
Q
QuRzy
01-25-2020, 05:05 PM #9

The system has started; manual testing is now running. Should I turn on docp beforehand?

X
XPGAMER_1
Junior Member
3
01-25-2020, 10:51 PM
#10
Yes, if it didn’t work, enable docp and try again.
X
XPGAMER_1
01-25-2020, 10:51 PM #10

Yes, if it didn’t work, enable docp and try again.

Pages (2): 1 2 Next