Assistance needed. Device fails to power on after new installation.

F5F Stay Refreshed Hardware Desktop Assistance needed. Device fails to power on after new installation.

Assistance needed. Device fails to power on after new installation.

Assistance needed. Device fails to power on after new installation.

B

Boba999
Member

130

12-10-2018, 12:10 AM

#1

I began this project some time ago. It isn’t the latest model but I had a few components left over and decided to put them together for him (he’s expecting a baby, so happy daddy gift). The MSI B450 tomahawk with Ryzen 5 1600 (6 cores) from Gigabyte 2080 came in fine after booting with a 1080. I used a 32GB DDR4 3200 MHz Corsair 850 PSU and it worked properly when I installed the 1080. Now, when I power on the debug LEDs they hit the CPU and cause it to stall before shutting down. Resetting the RAM fixes the issue but the CPU still cycles through DRAM and the LEDs turn off. Power remains steady, fans and RGB stay active. No signal detected during the full boot sequence. Any suggestions?

B

Boba999

12-10-2018, 12:10 AM #1

I began this project some time ago. It isn’t the latest model but I had a few components left over and decided to put them together for him (he’s expecting a baby, so happy daddy gift). The MSI B450 tomahawk with Ryzen 5 1600 (6 cores) from Gigabyte 2080 came in fine after booting with a 1080. I used a 32GB DDR4 3200 MHz Corsair 850 PSU and it worked properly when I installed the 1080. Now, when I power on the debug LEDs they hit the CPU and cause it to stall before shutting down. Resetting the RAM fixes the issue but the CPU still cycles through DRAM and the LEDs turn off. Power remains steady, fans and RGB stay active. No signal detected during the full boot sequence. Any suggestions?