F5F Stay Refreshed Power Users Networks Assist with setting up your home network.

Assist with setting up your home network.

Assist with setting up your home network.

F
FairyGirl21
Member
193
05-06-2016, 12:19 AM
#1
You're considering expanding your home network with Ethernet and access points. Is that sufficient? You're thinking about connecting the modem directly to the switch, using temporary access points, and possibly adding cameras later via Ubiquiti solutions. Are Ubiquiti products suitable for this project? They can be a bit advanced, but they offer solid performance. Let me know if you need more details!
F
FairyGirl21
05-06-2016, 12:19 AM #1

You're considering expanding your home network with Ethernet and access points. Is that sufficient? You're thinking about connecting the modem directly to the switch, using temporary access points, and possibly adding cameras later via Ubiquiti solutions. Are Ubiquiti products suitable for this project? They can be a bit advanced, but they offer solid performance. Let me know if you need more details!

E
EmeraldFoxMS
Member
99
05-13-2016, 05:13 AM
#2
Switch offers flexibility for clustering wired gadgets in one area, allowing direct connection from the modem. However, if you prefer fewer cables, a router becomes necessary eventually. I opted for a wireless extender instead of an access point—it handles both signal and re-transmission. If you stick with access points, power over Ethernet is an alternative. Your setup is also constrained by available power outlets. I’m unsure about the exact measurements; larger homes mean more devices, increasing failure chances and interference risks.
E
EmeraldFoxMS
05-13-2016, 05:13 AM #2

Switch offers flexibility for clustering wired gadgets in one area, allowing direct connection from the modem. However, if you prefer fewer cables, a router becomes necessary eventually. I opted for a wireless extender instead of an access point—it handles both signal and re-transmission. If you stick with access points, power over Ethernet is an alternative. Your setup is also constrained by available power outlets. I’m unsure about the exact measurements; larger homes mean more devices, increasing failure chances and interference risks.

L
Lollypop666
Junior Member
31
05-14-2016, 06:30 AM
#3
I wasn't sure about the setup, but since you're in Australia, I hope it helps. The router-modem combo your ISP offers is where the connection switch is located. Those PoE ports are positioned where you want devices wired rather than relying on Wi-Fi. There are likely around four phones, two laptops, two smart TVs, and three desktops all using Wi-Fi, plus three desktops that need a wired connection. Access points are preferred because changing the modem/router would require a new contract, which you don’t want to risk (you’ve gotten a good discount). The only available port is at the far end of the house, so the switch and router are necessary there. (Bed 1) Would using one access point in the middle work better? The longest cable run is about 31 meters—roughly a straight line from the switch to the port—and the ports are fixed in place. The access points can be moved around. Do you really need the switch at all? Would it be better if the modem only had a few wires coming out and all connections went through the roof?
L
Lollypop666
05-14-2016, 06:30 AM #3

I wasn't sure about the setup, but since you're in Australia, I hope it helps. The router-modem combo your ISP offers is where the connection switch is located. Those PoE ports are positioned where you want devices wired rather than relying on Wi-Fi. There are likely around four phones, two laptops, two smart TVs, and three desktops all using Wi-Fi, plus three desktops that need a wired connection. Access points are preferred because changing the modem/router would require a new contract, which you don’t want to risk (you’ve gotten a good discount). The only available port is at the far end of the house, so the switch and router are necessary there. (Bed 1) Would using one access point in the middle work better? The longest cable run is about 31 meters—roughly a straight line from the switch to the port—and the ports are fixed in place. The access points can be moved around. Do you really need the switch at all? Would it be better if the modem only had a few wires coming out and all connections went through the roof?

S
Syhr94
Junior Member
23
05-25-2016, 02:03 PM
#4
Use a PoE switch to supply power to the access points, or run separate power lines if needed.
S
Syhr94
05-25-2016, 02:03 PM #4

Use a PoE switch to supply power to the access points, or run separate power lines if needed.

C
Crazy_Heaven
Posting Freak
811
05-27-2016, 08:27 AM
#5
Yes, the device I installed is a PoE switch.
C
Crazy_Heaven
05-27-2016, 08:27 AM #5

Yes, the device I installed is a PoE switch.

E
Ellie1188
Member
66
06-02-2016, 03:18 AM
#6
Your thread has been relocated to the Networking section.
E
Ellie1188
06-02-2016, 03:18 AM #6

Your thread has been relocated to the Networking section.