F5F Stay Refreshed Hardware Desktop ASRock A320M-HDV R4.0 BIOS v2.00 – M.2 storage issue detected.

ASRock A320M-HDV R4.0 BIOS v2.00 – M.2 storage issue detected.

ASRock A320M-HDV R4.0 BIOS v2.00 – M.2 storage issue detected.

J
jayde0284
Junior Member
36
01-20-2019, 02:32 AM
#1
Just purchased a new essential P3 Plus NVMe storage from my nearby microcenter. When I installed it, the drive seemed nonfunctional right away. The computer froze on the boot screen (not the BIOS itself, but the display showing access to the BIOS). After taking the drive out, the system started working normally. I think there are two possible reasons: the drive might be faulty, or my motherboard's BIOS doesn't support M.2 devices and needs an update. I'm uncertain about starting the BIOS update process. I found ASRock's BIOS update guide for my model here: https://www.asrock.com/mb/amd/a320m-hdv r4.0/index.asp#BIOS. My hardware details are: ASRock A320M-HDV R4.0 motherboard, MSI RX 570 8G Armor OC GPU, AMD Ryzen 2600 (non-x) CPU, Corsair Vengeance 2133Hz (2x 8G) RAM. I'm using a PCIe Gen 4 M.2 drive in a PCIe Gen 3 port and expect only Gen 3 speeds once everything is resolved.
J
jayde0284
01-20-2019, 02:32 AM #1

Just purchased a new essential P3 Plus NVMe storage from my nearby microcenter. When I installed it, the drive seemed nonfunctional right away. The computer froze on the boot screen (not the BIOS itself, but the display showing access to the BIOS). After taking the drive out, the system started working normally. I think there are two possible reasons: the drive might be faulty, or my motherboard's BIOS doesn't support M.2 devices and needs an update. I'm uncertain about starting the BIOS update process. I found ASRock's BIOS update guide for my model here: https://www.asrock.com/mb/amd/a320m-hdv r4.0/index.asp#BIOS. My hardware details are: ASRock A320M-HDV R4.0 motherboard, MSI RX 570 8G Armor OC GPU, AMD Ryzen 2600 (non-x) CPU, Corsair Vengeance 2133Hz (2x 8G) RAM. I'm using a PCIe Gen 4 M.2 drive in a PCIe Gen 3 port and expect only Gen 3 speeds once everything is resolved.

K
Kurinevair
Junior Member
21
01-22-2019, 11:35 AM
#2
Updated to version 7.00 and later to 7.40
K
Kurinevair
01-22-2019, 11:35 AM #2

Updated to version 7.00 and later to 7.40

S
SpookyKingzzz
Junior Member
39
01-22-2019, 07:18 PM
#3
I reached out to Asrock directly; they advised updating only to BIOS 2.30 since later versions were tailored for newer CPUs. Nonetheless, I’m still facing problems. Might it be that my GPU is monopolizing all PCIe lanes? (X16 card on an X16 motherboard)?
S
SpookyKingzzz
01-22-2019, 07:18 PM #3

I reached out to Asrock directly; they advised updating only to BIOS 2.30 since later versions were tailored for newer CPUs. Nonetheless, I’m still facing problems. Might it be that my GPU is monopolizing all PCIe lanes? (X16 card on an X16 motherboard)?

Z
ZarkLR
Member
201
01-22-2019, 07:31 PM
#4
The x16 given to the GPU is compatible with the x4 on the M.2 slot. Restart the BIOS and consider returning the SSD if it fails afterward.
Z
ZarkLR
01-22-2019, 07:31 PM #4

The x16 given to the GPU is compatible with the x4 on the M.2 slot. Restart the BIOS and consider returning the SSD if it fails afterward.