Are you starting from scratch in OC with a fresh build? I can offer tips to help you get the best results.
Are you starting from scratch in OC with a fresh build? I can offer tips to help you get the best results.
I'm beginning a fresh project and planning to install the MSI Z170A m5 MOBO with a 6600k CPU. My graphics card is an MSI R9 390 with 8GB of RAM, and I have 16GB of RAM installed.
I can assemble the components but I'm unsure what to do next to fully utilize them. I want to maximize performance and efficiency. From what I understand, I can disable the GPU, CPU, and RAM settings?
I'm relatively new to this area and just want to create a solid, long-lasting build. The hardware is ready, but I'm not sure about the next steps.
Any tips from experienced builders on optimizing a new setup?
Thanks!
I'm not trying to go too far. I'm considering an OC, but I don't know much about it. Can I overclock my GPU or RAM? Is this worth the effort? I can overclock my CPU in BIOS, but RAM overclocking won't give much benefit and might make the system unstable. For GPU overclocking, I plan to use the MSI utility (possibly Afterburner) for your graphics card. Set the power limit to maximum and try increasing the GPU clock offset in 20mhz increments. After each change, run a benchmark like Firestrike to check for crashes.
11sphere92:
It will reduce the lifespan of your computer. You don't need to worry about that. By the time an overclocked part fails, it will already be outdated.
I'm not trying to go too far. I'm considering an OC, but I'm not very familiar with it. Can I overclock my GPU or RAM? Is that a good idea? Is it easy?
I plan to focus on heavy gaming and graphics-heavy tasks. Do you have any suggestions or advice?
Overclocking the CPU is definitely worth it, but RAM overclocking will only give small gains and can reduce stability. For GPU overclocking, use the MSI utility (possibly Afterburner) for your graphics card. Set the power limit to maximum and adjust the GPU clock offset to 20mhz. Test stability with benchmarks like Firestrike, and gradually lower the offset to 10mhz. If your card supports unlocked voltage, increase it slightly for better stability, but avoid excessive voltage to prevent damage. Once you find a stable GPU overclock, repeat the process for memory and ensure it remains stable with extended tests.
Edit: For CPU overclocking, this article might offer clearer guidance: http://www.pcgamer.com/how-to-overclock-...processor/