F5F Stay Refreshed Hardware Desktop Are you looking for a similar RAM model in Mobo QVL that differs from your current setup?

Are you looking for a similar RAM model in Mobo QVL that differs from your current setup?

Are you looking for a similar RAM model in Mobo QVL that differs from your current setup?

I
iiSweeTzz
Posting Freak
862
06-15-2022, 01:46 PM
#1
Hello. I am installing two PCs using the X670e-e Gaming Wi-Fi and X870e-e Gaming Wi-Fi adapters, both from ASUS, with 9800x3d and 9950x3d specifications respectively.
I have two sets of 64GB DDR5 RAM, CMK64GX5M2B6000Z30 by Corsair for these setups.
The issue is that the QVL for both motherboards shows a close match to CMK64GX5M2B6000Z28 (version 5.43.01), but not mine, which uses Z30/CL30.
Is this because they didn’t test every variant, or should I have specifically purchased the Z28 model?
There is a Z30 Corsair 2x32 6000 listed, but it’s a different RAM type with RGB lighting and higher heatsinks.
Will these RAM kits fit with my adapters for the rigs I’m building? I plan to just enable Expo and leave it as is.
I
iiSweeTzz
06-15-2022, 01:46 PM #1

Hello. I am installing two PCs using the X670e-e Gaming Wi-Fi and X870e-e Gaming Wi-Fi adapters, both from ASUS, with 9800x3d and 9950x3d specifications respectively.
I have two sets of 64GB DDR5 RAM, CMK64GX5M2B6000Z30 by Corsair for these setups.
The issue is that the QVL for both motherboards shows a close match to CMK64GX5M2B6000Z28 (version 5.43.01), but not mine, which uses Z30/CL30.
Is this because they didn’t test every variant, or should I have specifically purchased the Z28 model?
There is a Z30 Corsair 2x32 6000 listed, but it’s a different RAM type with RGB lighting and higher heatsinks.
Will these RAM kits fit with my adapters for the rigs I’m building? I plan to just enable Expo and leave it as is.

L
LewisS_1999
Member
100
06-16-2022, 03:28 PM
#2
EXPO has support, it should work fine.
L
LewisS_1999
06-16-2022, 03:28 PM #2

EXPO has support, it should work fine.

N
notkennyS
Junior Member
25
06-17-2022, 05:00 AM
#3
Yes, it functions properly when the memory has an EXPO feature.
N
notkennyS
06-17-2022, 05:00 AM #3

Yes, it functions properly when the memory has an EXPO feature.

M
MCCrafter100
Member
159
07-07-2022, 04:30 PM
#4
No, but it's highly likely. There are memory profiles for AMD chips, and the memory controller is located on the CPU rather than the motherboard. In the worst scenario, you could contact Corsair and they would probably replace them if they didn't function properly in your system.
M
MCCrafter100
07-07-2022, 04:30 PM #4

No, but it's highly likely. There are memory profiles for AMD chips, and the memory controller is located on the CPU rather than the motherboard. In the worst scenario, you could contact Corsair and they would probably replace them if they didn't function properly in your system.

_
_xLizziex_x
Junior Member
12
07-07-2022, 05:26 PM
#5
you're in argentina without official support, so if it doesn't work you might need to sell the current one and buy another. to be sure it functions, check if it boots up—then it's likely working.
_
_xLizziex_x
07-07-2022, 05:26 PM #5

you're in argentina without official support, so if it doesn't work you might need to sell the current one and buy another. to be sure it functions, check if it boots up—then it's likely working.

N
NinjaWolf57
Junior Member
16
07-07-2022, 09:00 PM
#6
Corsair maintains a presence in Argentina. Purchasing from an authorized seller ensures availability, as many items require shipping to the country if not already present locally.
Where to purchase
Corsair
www.corsair.com
Booting is a solid beginning. After that, configure EXPO. At this stage, perform a memory test. MemTest86 is highly recommended. However, basic system stability during memory usage remains satisfactory.
N
NinjaWolf57
07-07-2022, 09:00 PM #6

Corsair maintains a presence in Argentina. Purchasing from an authorized seller ensures availability, as many items require shipping to the country if not already present locally.
Where to purchase
Corsair
www.corsair.com
Booting is a solid beginning. After that, configure EXPO. At this stage, perform a memory test. MemTest86 is highly recommended. However, basic system stability during memory usage remains satisfactory.

X
XxGra4yxX
Junior Member
46
07-08-2022, 02:48 AM
#7
With the kits available, give them a try.
If it boots,
Run
memtest86.
It doesn't rely on Windows.
If it completes a full test without any issues, you're probably fine.
For extra confidence, repeat a few more times.
X
XxGra4yxX
07-08-2022, 02:48 AM #7

With the kits available, give them a try.
If it boots,
Run
memtest86.
It doesn't rely on Windows.
If it completes a full test without any issues, you're probably fine.
For extra confidence, repeat a few more times.