Are you asking if these high-end Coffee Lake systems require a premium cooling solution?
Are you asking if these high-end Coffee Lake systems require a premium cooling solution?
I'm considering an upgrade for my current setup and wondering if a high-end cooler is necessary for the CPU. I've looked into Noctua options but found they won't fit due to space constraints. Since I won't be overclocking, I'm also thinking about whether a standard fan would suffice. Most people I've spoken to say the stock cooler should perform adequately under typical conditions. My budget hinges on whether I choose an i5 or i7 processor, and I plan to focus on gaming, so I expect to opt for the i5. With around $70 available, I'm hoping not to overspend. So, what CPU fan should I consider?
There are superior, more costly coolers available. However, the product at https://pcpartpicker.com/product/hmtCmG/...212e20pkr2 stands out as the most popular and probably the top budget option. It measures 159mm. If you plan to overclock it, it may not reach its full potential, but it should perform adequately.
Do you need it? No.
Would I suggest it? Yes. It offers quieter operation and a cooler CPU, plus it boosts overclocking possibilities.
Hyper 212 supports the stock speed but may overheat when turbo is on, as some boards intentionally boost turbo. For example, reaching 4.30GHz across all cores instead of just one (8600K). It will reach its limits with overclocking.
Also, "ThatVietGuy" is correct. If you're looking for a good value, this is definitely worth considering.
CRYORIG - H7
Heath.romine is planning to improve his existing setup. He’s considering whether an expensive cooler would be necessary for the CPU. He’s noticed that the Noctua models don’t fit his case, as he has about 160mm of space. Since he won’t be overclocking, he’s also thinking about purchasing a standard fan. Most people he’s spoken to have said the stock cooler should work adequately under typical loads and at factory speeds. His budget depends on whether he chooses an i5 or i7 processor; he’s leaning toward the i5, which would cost around $70 for a cooler, though he’d prefer not to spend much.
His question is: what CPU fan should he buy?
He points out that no stock cooler exists for the 8600k and 8700k chipsets. Intel doesn’t include them with coolers. The stock coolers shipped with the locked 8th generation CPUs aren’t sufficient either, as they’re inadequate for those CPUs and have a lower TDP (65w) compared to the K versions (95w) of i5 and i7.
Tejayd responds that there are more expensive options available. He recommends the cooler listed at https://pcpartpicker.com/product/hmtCmG/...212e20pkr2, which is popular and likely offers good value. It’s 159mm. If he does overclocking, it might not reach its full potential, but it should still perform well. The 212 Evo was once a top budget choice a few years back, though better alternatives now exist. The Cryorig H7 is considered superior to the 212 Evo and usually matches its price. It’s also suitable for non-overclocking builds of both i5 and i7.
as far as i've noticed the premium air coolers tend to be over 160mm, yet there are definitely many mid-range options available for selection. I'd consider models such as Thermalright le grand macho, scythe ninja 5, silver arrow itx-r, etc.
I'm not pushing overclocking. For high-end performance it doesn't matter much, what matters is a solid base clock and turbo cooling.
I suggest CRYORIG - H7. It fits well and keeps things cool properly. It also has enough RAM clearance for four RAM modules.
https://www.tweaktown.com/reviews/6958/c...ndex5.html
cryorig h7 performs well. It's a better option than hyper 212 for the same cost, in my opinion. If you don't plan to overclock, you shouldn't install a large heatsink on your motherboard, as it could lead to issues with long-term stability.