Are the CPU-Z readings incorrect or is there an issue with overclocking?
Are the CPU-Z readings incorrect or is there an issue with overclocking?
I recently increased the overclock of my i5 6600k and after extended stress testing and gaming, photoshopping, etc., I achieved a stable overclock with a 75°C maximum at full load (thanks to the Noctua NH-D15). Initially, temperatures ranged from 20 to 75°C, voltages between 0.8V and 1.36V, and clock speeds from 800MHz to 4500MHz depending on the workload. After a week, when I checked randomly, temperatures remained consistent with previous readings, while voltages stayed the same (fluctuating as needed). Clock speeds were consistently locked around 4500MHz. Should I be concerned or is this just a software issue?
Consider adjusting your power settings. Look for "power options" in the search bar, press windows plus x, or navigate through the start menu to control panel, performance information, and tools. Within the hardware section, find power options and modify "change power saving settings." Once there, proceed to plan settings, then advanced power settings, expanding processor power management and minimum processor state. This setting is typically at 5%, but it may differ from your current value of 100%.
Consider adjusting your power settings. Look for "power options" in the search bar, press windows plus x, or navigate through the start menu to control panel, performance information, and tools. Within the hardware section, find power options and modify "change power saving settings." Once there, proceed to plan settings, then advanced power settings, expanding processor power management and minimum processor state. This setting is typically at 5%, but it may differ from your current value of 100%.
Try adjusting your power options. Look for "power options" in the search bar, press Windows + X, or go to the start menu -> control panel -> performance information and tools -> adjust power settings. If you're using the category layout, navigate to hardware and sound -> under power options, click "change power saving settings." Once there, proceed to plan settings, then advanced power settings, expand processor power management, and adjust minimum processor state. This setting is often set to 5%, but it might be higher on your system. Thanks mate, that should resolve the issue after an update to Windows 10.