Are CPU overclocking and CPU ratio identical concepts?
Are CPU overclocking and CPU ratio identical concepts?
as mentioned in the title, im just confused coz people say a320 mobos dont support overclocking and meanwhile my a320 mobo have "cpu ratio" that can be played with. in cpu ratio if i put 42 that means my cpu clock will go 4.2ghz right? so is it the same as overclocking? it's an "emaxx a320 gaming" mobo. im pretty sure this one's a less known brand. also is 1.3V ok for overclocking or is it overkill? thanks
Adjusting the CPU ratio and voltage settings is similar to overclocking, underclocking, or undervolting, based on the direction of your adjustments. Therefore, it is indeed overclocking. You must ensure stability testing throughout the process to confirm the overclock remains stable. There is no definitive answer about the required voltage—whether 1.3v or another value—since each CPU and motherboard behaves differently.
Adjusting the CPU ratio and voltage settings is similar to overclocking, underclocking, or undervolting, based on the direction of changes. It is indeed overclocking. You must ensure stability testing throughout the process to confirm the overclock remains stable. There is no definitive answer about the required voltage—whether 1.3v or another setting—for a stable overclock, as each CPU and motherboard behaves differently.
A320 chipset motherboards restrict CPU overclocking capabilities. The BIOS typically permits adjusting CPU multipliers, though this usually doesn't impact real-world CPU speed or performance. I'm uncertain about modifying the CPU Vcore voltage, but if such adjustments do matter, reducing it through offset changes might be effective. It's advisable to verify stability as suggested by Dark, and under-volting can also help keep the processor cooler.
It seems this product likely comes from a Chinese manufacturer who probably doesn't align with AMD's standards or requirements. It might not be necessary for them to follow the same rules as other partners. Alternatively, they may have turned on ratio unlocking in their BIOS without proper consideration. This doesn't necessarily indicate a good choice, and it appears the board isn't equipped to manage the higher voltage needed for stable multiplier adjustments. I'm unfamiliar with emaxx, so it probably comes from an independent Chinese source.