F5F Stay Refreshed Power Users Overclocking Anything such as a VRM cooler?

Anything such as a VRM cooler?

Anything such as a VRM cooler?

S
Soul0fPhoenix
Junior Member
42
02-16-2016, 12:12 PM
#1
I own a MS-7778 (JasmineR) and asked in the AMD Overclocking Club whether it's advisable to overclock it because it lacks a VRM cooler. I aim to push my A10 6800k APU to at least 4.8ghz, but the VRM isn't providing enough support. The question is: are there VRM coolers or other solutions that could help achieve higher overclocks, or are these mobos designed with fewer VRMs for this reason?
S
Soul0fPhoenix
02-16-2016, 12:12 PM #1

I own a MS-7778 (JasmineR) and asked in the AMD Overclocking Club whether it's advisable to overclock it because it lacks a VRM cooler. I aim to push my A10 6800k APU to at least 4.8ghz, but the VRM isn't providing enough support. The question is: are there VRM coolers or other solutions that could help achieve higher overclocks, or are these mobos designed with fewer VRMs for this reason?

K
Koquillon
Junior Member
4
02-16-2016, 07:10 PM
#2
Yes, you can purchase thermal pads/tape and separate heatsinks to assist. You can also direct a fan toward the passive heatsinks. Remember that heat isn't the sole factor—your board's power delivery capability is also limited. If you're just testing or playing, it's fine, but be aware that pushing low-end gear too high for extended periods could damage your board (for example, trying to achieve 4.8Ghz continuously).
K
Koquillon
02-16-2016, 07:10 PM #2

Yes, you can purchase thermal pads/tape and separate heatsinks to assist. You can also direct a fan toward the passive heatsinks. Remember that heat isn't the sole factor—your board's power delivery capability is also limited. If you're just testing or playing, it's fine, but be aware that pushing low-end gear too high for extended periods could damage your board (for example, trying to achieve 4.8Ghz continuously).

A
AzeDark
Member
73
02-22-2016, 10:18 PM
#3
You can purchase small heatsinks from eBay or similar places, along with thermal tape or adhesive to fasten them. Alternatively, you can install a tiny CPU fan across the VRM using zip ties and other securing methods.
A
AzeDark
02-22-2016, 10:18 PM #3

You can purchase small heatsinks from eBay or similar places, along with thermal tape or adhesive to fasten them. Alternatively, you can install a tiny CPU fan across the VRM using zip ties and other securing methods.

E
Endermaja
Junior Member
10
02-24-2016, 08:52 AM
#4
Yes, you can purchase thermal pads/tape and separate heatsinks to assist. You can also direct a fan toward the passive heatsinks. Remember that heat isn't the sole factor—your board's power delivery capability is also limited. If you're only testing or playing, it's fine, but be aware that pushing low-end gear too high for extended periods (such as running at 4.8Ghz continuously) could damage your setup.
E
Endermaja
02-24-2016, 08:52 AM #4

Yes, you can purchase thermal pads/tape and separate heatsinks to assist. You can also direct a fan toward the passive heatsinks. Remember that heat isn't the sole factor—your board's power delivery capability is also limited. If you're only testing or playing, it's fine, but be aware that pushing low-end gear too high for extended periods (such as running at 4.8Ghz continuously) could damage your setup.

M
Miel1994
Member
104
02-25-2016, 01:24 PM
#5
Thanks. I'm trying to improve my setup. VRM isn't something I've encountered before, and I'm concerned about overheating. It seems my motherboard might not have a heatsink or proper fuse protection, which could affect performance. I'm planning to upgrade soon with an ASUS Z170-A ATX board, DDR4 RAM, and an i7-7700k CPU. The total should be around $600 or more, but I believe it will be worth it.
M
Miel1994
02-25-2016, 01:24 PM #5

Thanks. I'm trying to improve my setup. VRM isn't something I've encountered before, and I'm concerned about overheating. It seems my motherboard might not have a heatsink or proper fuse protection, which could affect performance. I'm planning to upgrade soon with an ASUS Z170-A ATX board, DDR4 RAM, and an i7-7700k CPU. The total should be around $600 or more, but I believe it will be worth it.