Another issue with starting a Ram drive
Another issue with starting a Ram drive
Evening friends, I'm setting up a setup for a friend with a powerful system. The board is loaded with the CPU, Noctua coolers, and 64GB of Teamgroup 3200mhz RAM. I've confirmed that only one RAM stick fits in slot A2, but adding more causes no display or post issues. Any advice, MuskieSpook?
^That's correct. You might attempt to reset the CMOS settings on the device and observe whether the system can refresh its memory. Be aware it could require some time for the process to complete.
Asus x570 e gaming board with Ryzen 7 3700X is trying to reach post 64GB of Team Group dimms 4x16 teamgroup 1TB NVMe in slot 1, generic NVMe 256GB in slot 2, Zotac RTX Super 2060 mini for video noctua nh 12US cooler. Linus makes installing this look much simpler in his videos. If more than one dimmer is present, I see a strong RAM error light and q code 02 successfully tested all four dimmers in slot one, each working individually.
Is your Teamgroup 3200mhz available on the QVL list? Based on the provided document, it appears to be a ROG Strix X570-E Gaming. Please note the link for reference. Also, I looked through the Team list and found only models supporting two DIMMs slots, not four. If you manage to configure it with just two slots, compatibility with all four DIMMs might be limited. Ensure you're using slots A2 and B2 for dual-channel operation. Are you running a DOCP profile? Also, confirm that the latest BIOS version is installed on the motherboard.