F5F Stay Refreshed Hardware Desktop AMD 3600 OC 4.2ghz 78°C air cooled

AMD 3600 OC 4.2ghz 78°C air cooled

AMD 3600 OC 4.2ghz 78°C air cooled

B
blocksmasher12
Junior Member
10
12-21-2019, 01:53 AM
#1
The design clearly shows you're getting solid performance. At 4.2 GHz you're already handling the workload well, but pushing further might need a better cooling solution. An AIO cooler could help maintain stability under higher loads without sacrificing speed.
B
blocksmasher12
12-21-2019, 01:53 AM #1

The design clearly shows you're getting solid performance. At 4.2 GHz you're already handling the workload well, but pushing further might need a better cooling solution. An AIO cooler could help maintain stability under higher loads without sacrificing speed.

S
Sjittham
Member
62
01-05-2020, 04:04 AM
#2
Not 3600 times extra...
S
Sjittham
01-05-2020, 04:04 AM #2

Not 3600 times extra...

4
4um_For_Rose
Member
86
01-05-2020, 08:32 AM
#3
Your current setup is solid, but hitting 4.2 is quite challenging for many. How does your core perform?
4
4um_For_Rose
01-05-2020, 08:32 AM #3

Your current setup is solid, but hitting 4.2 is quite challenging for many. How does your core perform?

T
towwl
Member
63
01-05-2020, 09:23 AM
#4
Expect no more than 4.2, improved cooling could actually help.
T
towwl
01-05-2020, 09:23 AM #4

Expect no more than 4.2, improved cooling could actually help.

_
_Logic_301_
Junior Member
41
01-06-2020, 05:37 PM
#5
I set the vcore to auto mode for the first time since using M-SI afterburner.
_
_Logic_301_
01-06-2020, 05:37 PM #5

I set the vcore to auto mode for the first time since using M-SI afterburner.

L
102
01-06-2020, 06:20 PM
#6
Occasionally your motherboard sends more voltage to your chip than necessary, especially noticeable in the Z490 boards lately. It’s wise to check your setup or ensure your voltage stays below 1.275V to prevent chip damage over time.
L
lookatmyskill2
01-06-2020, 06:20 PM #6

Occasionally your motherboard sends more voltage to your chip than necessary, especially noticeable in the Z490 boards lately. It’s wise to check your setup or ensure your voltage stays below 1.275V to prevent chip damage over time.