After increasing RAM speed to its advertised rate, no video output appears.
After increasing RAM speed to its advertised rate, no video output appears.
I set up my PC, uploaded the OS, installed drivers, everything worked smoothly. I upgraded my RAM to match its advertised rate in the BIOS, saved the changes and restarted. Now I’m still missing video output, even after several restarts. Could you help me figure this out?
I visited XMP and set it to disabled, then changed it to Profile 1. Removing the CMOS might be taking out the on-board motherboard battery.
This action will restore the motherboard's BIOS to its original configuration.
Got your feedback, that’s helpful. Does that imply you can’t adjust your RAM to match its listed speed? Right now it’s running at 2500 while the specs say 3600.
You need to adjust the settings yourself. Begin by configuring the frequency to 3200MHz with a voltage of 1.35v for the SoC, aiming for a boost to 1.1v to try launching at 3200mhz.
What processor are you using? Adjust the SOC to 1.1 Drm to 1.35, then set it to 2933 with docp / xmp on For zen 2. Change the SOC to 1.1 Drm to 1.35 and test 3200. If it boots, run memtest86 and OCCT to ensure stability. If stable, proceed with the next steps. For zen, try 3200. For zen 2, try 3600. For Intel, set the vccio / vccsa to 1.1 Drm to 1.35 and attempt 3600.
The Ryzen 7 2700X works well with most configurations. Let me know what settings you're using!