F5F Stay Refreshed Hardware Desktop After freezing, no video appears, and a check exception occurs on the BSOD machine.

After freezing, no video appears, and a check exception occurs on the BSOD machine.

After freezing, no video appears, and a check exception occurs on the BSOD machine.

I
InsygniaS
Member
Find
55
09-27-2020, 07:39 AM
#1
Hey everyone, I assembled the system using refurbished components like an ASUS H510M board, an i5 11400F, and a 3060Ti, along with SSDs and other parts. It was running smoothly until recently. A few days ago it froze completely, cursor still visible on the screen. After turning it off and back on, there was no video output on either monitor—HDMI or display cable. It would occasionally boot with a slight tilt, but both times it would freeze again right after Windows started.

I noted that once it froze again, it triggered a machine check exception and then displayed the BSOD screen with an error code. Even after replacing the motherboard with a brand new identical model, I couldn’t get any video output. I’ve checked RAM in different slots, removed the board from the case to rule grounding issues, and switched power supplies. Every time I power it on, the monitor lights up as if in standby but doesn’t display anything and warns me about power-saving mode.

Any suggestions? Thanks a lot!
Reply
Reply
I
InsygniaS
09-27-2020, 07:39 AM #1

Hey everyone, I assembled the system using refurbished components like an ASUS H510M board, an i5 11400F, and a 3060Ti, along with SSDs and other parts. It was running smoothly until recently. A few days ago it froze completely, cursor still visible on the screen. After turning it off and back on, there was no video output on either monitor—HDMI or display cable. It would occasionally boot with a slight tilt, but both times it would freeze again right after Windows started.

I noted that once it froze again, it triggered a machine check exception and then displayed the BSOD screen with an error code. Even after replacing the motherboard with a brand new identical model, I couldn’t get any video output. I’ve checked RAM in different slots, removed the board from the case to rule grounding issues, and switched power supplies. Every time I power it on, the monitor lights up as if in standby but doesn’t display anything and warns me about power-saving mode.

Any suggestions? Thanks a lot!

Reply
Reply