F5F Stay Refreshed Hardware Desktop Adjustable display appears inactive in BIOS settings... once activated

Adjustable display appears inactive in BIOS settings... once activated

Adjustable display appears inactive in BIOS settings... once activated

S
SonyVegas_
Member
Find
179
10-11-2020, 08:31 AM
#1
I noticed the resizable BAR feature wasn't activated on my system. After updating the motherboard BIOS and verifying RTX 3070 drivers, I enabled it in the BIOS but still saw it as disabled in the Nvidia Control Panel and GPU-Z. I'm unsure what else to try, so here I am Tongue. Here are my specs: TYIA Motherboard, ASRock B550 Phantom Gaming 4a/c, Ryzen 7 3700x, ZOTAC RTX 3070, 8GB DDR4 RAM, 32GB, 750W 80+ Gold PSU.
Reply
Reply
S
SonyVegas_
10-11-2020, 08:31 AM #1

I noticed the resizable BAR feature wasn't activated on my system. After updating the motherboard BIOS and verifying RTX 3070 drivers, I enabled it in the BIOS but still saw it as disabled in the Nvidia Control Panel and GPU-Z. I'm unsure what else to try, so here I am Tongue. Here are my specs: TYIA Motherboard, ASRock B550 Phantom Gaming 4a/c, Ryzen 7 3700x, ZOTAC RTX 3070, 8GB DDR4 RAM, 32GB, 750W 80+ Gold PSU.

Reply
Reply
J
JebThePleb
Posting Freak
Find
898
10-13-2020, 10:15 PM
#2
You need to turn on ReBAR before setting up Windows. It’s a bit unclear from what you said. Also, could you show me a screenshot of the BIOS setting being changed? Sometimes the system resets those options.
Reply
Reply
J
JebThePleb
10-13-2020, 10:15 PM #2

You need to turn on ReBAR before setting up Windows. It’s a bit unclear from what you said. Also, could you show me a screenshot of the BIOS setting being changed? Sometimes the system resets those options.

Reply
Reply
Y
Yuikonnu_
Junior Member
Find
3
10-15-2020, 04:12 AM
#3
Maybe the operator should reset the CMOS and adjust settings by hand. A few board firmware versions can behave unpredictably.
Reply
Reply
Y
Yuikonnu_
10-15-2020, 04:12 AM #3

Maybe the operator should reset the CMOS and adjust settings by hand. A few board firmware versions can behave unpredictably.

Reply
Reply
V
Vortex59_YT
Member
Find
198
10-18-2020, 07:49 PM
#4
You can turn it on or off as needed. Just enable reBar and ensure 4G support is active, then adjust it in the driver. I understand the need to verify the settings carefully. My board (B550 Tomahawk) has an odd issue where search displays certain BIOS options twice. Modifying one appears as updated when you click Save+Reboot, while the other stays unchanged. You'll need to confirm whether any changes actually made a difference.
Reply
Reply
V
Vortex59_YT
10-18-2020, 07:49 PM #4

You can turn it on or off as needed. Just enable reBar and ensure 4G support is active, then adjust it in the driver. I understand the need to verify the settings carefully. My board (B550 Tomahawk) has an odd issue where search displays certain BIOS options twice. Modifying one appears as updated when you click Save+Reboot, while the other stays unchanged. You'll need to confirm whether any changes actually made a difference.

Reply
Reply