Adjust RAM speed to 3000MHz but experience issues with system startup
Adjust RAM speed to 3000MHz but experience issues with system startup
Hi,
I have an i7 6700k processor and an ASRock Z170 Extreme 4 motherboard. I'm aiming for a RAM speed of 3000mhz, but the CPU only supports up to 2400mhz. I've set the XMP profile to 3000mhz, which works initially but causes crashes and memory errors during boot.
Could you suggest a way to run this configuration? Should I consider overclocking the CPU for stability?
Thanks for your help.
It works properly at 2400. It only crashes when I change it to 3000. Both are brand new models.
If it crashes at 3000Mhz, I plan to raise the voltage for the memory to improve stability. Running memory modules at a slightly slower pace might also help achieve better consistency if they aren't stable at higher speeds. Generally, most PC performance is limited by the CPU, graphics card, and storage system. Memory speed usually has minimal impact when overclocking the modules.
You might not notice significant improvements unless you also adjust the CPU settings. Dual channel DDR4 at 2400 is close to the theoretical maximum the CPU can achieve at regular speeds. Regarding the crashing problem, experimenting with different timings could be more effective than simply increasing the frequency. You might actually enhance performance by running at a lower/stock speed and optimizing the timing instead.
The_Tester :
You might not notice significant improvements unless you also change the CPU settings. Dual channel DDR4 at 2400 is close to the theoretical maximum performance this CPU can achieve at regular speeds. Regarding the crashing issue, you could experiment more with timing adjustments instead of just increasing the overall frequency. It's possible you can boost performance at a lower/stock speed while refining the timing. Do you know what ideal timings would look like?