F5F Stay Refreshed Hardware Desktop Adjust Lite load settings for the 13600k

Adjust Lite load settings for the 13600k

Adjust Lite load settings for the 13600k

Z
Zerpenn
Member
63
11-15-2022, 09:51 AM
#1
Hello, I've set up the configuration you described. My Cinebench R23 score of 23114 looks lower than expected. I've attached a screenshot from HWInfo64 after the 10-minute multi-core test. For BIOS settings, consider adjusting power limits and Lite load values to optimize performance. Let me know if you need further guidance!
Z
Zerpenn
11-15-2022, 09:51 AM #1

Hello, I've set up the configuration you described. My Cinebench R23 score of 23114 looks lower than expected. I've attached a screenshot from HWInfo64 after the 10-minute multi-core test. For BIOS settings, consider adjusting power limits and Lite load values to optimize performance. Let me know if you need further guidance!

M
makyno
Junior Member
21
11-15-2022, 06:47 PM
#2
Hey there, that's essentially my setup except for the 13600K. From another discussion, my default BIOS settings showed an auto Vcore around 1.3v, and when Cinebench was active my temps climbed to 95°C. I adjusted the Vcore to 1.1v (constant voltage) and used a Lite Load of 1, which helped keep all cores at 5.1GHz on the P-cores and 4.1GHz on the E-cores. I managed to reach up to 5.2 and 4.2, though during gaming Cinebench wasn't fully stable. I haven’t tried pushing it further, but based on what I’ve seen, 5.6P / 4.6E seems possible without overheating too much.
M
makyno
11-15-2022, 06:47 PM #2

Hey there, that's essentially my setup except for the 13600K. From another discussion, my default BIOS settings showed an auto Vcore around 1.3v, and when Cinebench was active my temps climbed to 95°C. I adjusted the Vcore to 1.1v (constant voltage) and used a Lite Load of 1, which helped keep all cores at 5.1GHz on the P-cores and 4.1GHz on the E-cores. I managed to reach up to 5.2 and 4.2, though during gaming Cinebench wasn't fully stable. I haven’t tried pushing it further, but based on what I’ve seen, 5.6P / 4.6E seems possible without overheating too much.

J
jackster770
Member
139
11-16-2022, 03:29 AM
#3
Avoid power caps, use light mode 3-5. Open Task Manager, right-click Cinebench, go to Details, set priority high. Stop all background processes and rerun the test. It seems Dirty is close to 23k, just under all scores by 300 points, and there’s no thermal throttling. Doing these steps should bring you around 24k.
J
jackster770
11-16-2022, 03:29 AM #3

Avoid power caps, use light mode 3-5. Open Task Manager, right-click Cinebench, go to Details, set priority high. Stop all background processes and rerun the test. It seems Dirty is close to 23k, just under all scores by 300 points, and there’s no thermal throttling. Doing these steps should bring you around 24k.