Adjust DRAM speed to 3200MHz

F5F Stay Refreshed Hardware Desktop Adjust DRAM speed to 3200MHz

Adjust DRAM speed to 3200MHz

Adjust DRAM speed to 3200MHz

W

Winner
Member

242

11-20-2019, 03:01 PM

#1

Hello, I constructed this setup: Patriot Viper 4 Blackout RAM, 16 GB (two 8 GB), DDR4, 3200 DIMM, AMD Ryzen 5 3600x processor, motherboard ASUS PRIME B550M-A. The latest BIOS version is available, and I’m relatively new to this system. I’ve heard the CPU can operate at 3200MHz DRAM frequency since the default is 2133MHz. I managed to reach 3000MHz without issues, but when I set it to 3200MHz the computer fails to start. I’d like to enable dual-channel at that speed if possible. If not, even 3000MHz would be acceptable, but please confirm whether my RAM is currently running at 3000MHz. I’ve attached some screenshots for reference. Is this configuration correct? Thank you, Jaka Š.

W

Winner

11-20-2019, 03:01 PM #1

Hello, I constructed this setup: Patriot Viper 4 Blackout RAM, 16 GB (two 8 GB), DDR4, 3200 DIMM, AMD Ryzen 5 3600x processor, motherboard ASUS PRIME B550M-A. The latest BIOS version is available, and I’m relatively new to this system. I’ve heard the CPU can operate at 3200MHz DRAM frequency since the default is 2133MHz. I managed to reach 3000MHz without issues, but when I set it to 3200MHz the computer fails to start. I’d like to enable dual-channel at that speed if possible. If not, even 3000MHz would be acceptable, but please confirm whether my RAM is currently running at 3000MHz. I’ve attached some screenshots for reference. Is this configuration correct? Thank you, Jaka Š.

J

janmathei
Junior Member

13

11-20-2019, 08:09 PM

#2

Configure slots A2 and B2, then restart the process.

J

janmathei

11-20-2019, 08:09 PM #2

Configure slots A2 and B2, then restart the process.

P

Pat_doesMC
Member

65

11-21-2019, 10:29 PM

#3

You configure the frequency using either an XMP profile or by adjusting it manually.

P

Pat_doesMC

11-21-2019, 10:29 PM #3

You configure the frequency using either an XMP profile or by adjusting it manually.

M

MrZombie854
Member

58

11-21-2019, 11:57 PM

#4

I use an XMP profile (DOCP).

M

MrZombie854

11-21-2019, 11:57 PM #4

I use an XMP profile (DOCP).

K

kickster54
Junior Member

18

11-22-2019, 06:25 AM

#5

K

kickster54

11-22-2019, 06:25 AM #5