Adjust Asus Tuf X570 RAM to 3600MHz settings

2fabulous4u_
Junior Member

02-16-2019, 08:12 PM

I can't run DCOP on the motherboard as it causes extreme instability. The RAM calculator isn’t working either. How can I safely lower my RAM to 3400 in this setup? I have four 8GB Trident Z Neo sticks and a Ryzen 3900X.

2fabulous4u_

02-16-2019, 08:12 PM #1

mark_mister
Junior Member

02-19-2019, 11:47 PM

Hi there! Could you let me know which RAM model you're interested in? Also, confirm if your system runs the most recent BIOS update. Lastly, when did you buy the motherboard?

mark_mister

02-19-2019, 11:47 PM #2

Hi there! Could you let me know which RAM model you're interested in? Also, confirm if your system runs the most recent BIOS update. Lastly, when did you buy the motherboard?

D3rbau3ral3x
Junior Member

02-20-2019, 02:47 AM

Consider updating your bio if you haven’t already. Experienced problems with the TUF X570 using the Trident Z Neo 3600 kit until I updated the BIOS.

D3rbau3ral3x

02-20-2019, 02:47 AM #3

Consider updating your bio if you haven’t already. Experienced problems with the TUF X570 using the Trident Z Neo 3600 kit until I updated the BIOS.

matei91
Member

03-02-2019, 10:02 PM

This is encouraging information.

matei91

03-02-2019, 10:02 PM #4

This is encouraging information.

Pierleo29
Member

133

03-03-2019, 05:29 AM

I always choose the newest options since this PC setup tends to be unreliable. Right now I'm using version 2607. I've got the latest BIOS, Windows updates, and chipset configuration.

Pierleo29

03-03-2019, 05:29 AM #5

I always choose the newest options since this PC setup tends to be unreliable. Right now I'm using version 2607. I've got the latest BIOS, Windows updates, and chipset configuration.

Sauciffle
Junior Member

03-03-2019, 06:22 AM

Trident Z Neo 3600 with 4x 8GB sticks installed. Every slot is packed. The newest BIOS and chipset are in place. I’m not sure about tuning RAM without DOCP, but I believe the board handles 3400 MHz better than 3600 MHz.

Sauciffle

03-03-2019, 06:22 AM #6

swedish_melon
Member

109

03-04-2019, 09:05 AM

I have only a small amount of practical experience with the board, and it ran an older BIOS version. The sticks I used were similar in speed and timing but not in capacity. I struggled to keep the board stable above 3400 MHz. To run them at 3400 MHz, you need to adjust that setting in the BIOS after enabling DOCP. When the display shows 3600, you can use the mouse or a key to modify it.

swedish_melon

03-04-2019, 09:05 AM #7

crackles12
Junior Member

03-06-2019, 05:54 PM

I've been testing the stock 2133MHz default and still encounter freezes while gaming. I'm unsure which part is causing the issue—CPU, motherboard, or power supply. I've checked temperatures, RAM, and drivers, but it seems to be related to one of those components.

crackles12

03-06-2019, 05:54 PM #8