F5F Stay Refreshed Hardware Desktop Additional Ram, No Booting.

Additional Ram, No Booting.

Additional Ram, No Booting.

D
Dannumber2
Member
54
02-27-2021, 05:40 PM
#1
I recently installed more of the same RAM on my computer, but it won’t boot now. I upgraded from two 16GB sticks to four 32GB sticks. The PC keeps switching between error messages and finally boots into BIOS saying it failed to start. I changed the XMP setting from 1 to 2, and it worked normally at first when I switched to the slower XMP 2. I’m curious if this will let me use my 5200MHz fully. Here’s what I have:
- RAM model: https://www.amazon.com/Kingston-Technolo...B0B1QNW5H4
- Motherboard: https://www.amazon.com/GIGABYTE-Z690-AOR...B09JZFT4SN
D
Dannumber2
02-27-2021, 05:40 PM #1

I recently installed more of the same RAM on my computer, but it won’t boot now. I upgraded from two 16GB sticks to four 32GB sticks. The PC keeps switching between error messages and finally boots into BIOS saying it failed to start. I changed the XMP setting from 1 to 2, and it worked normally at first when I switched to the slower XMP 2. I’m curious if this will let me use my 5200MHz fully. Here’s what I have:
- RAM model: https://www.amazon.com/Kingston-Technolo...B0B1QNW5H4
- Motherboard: https://www.amazon.com/GIGABYTE-Z690-AOR...B09JZFT4SN

J
JesavGYT30
Junior Member
4
03-07-2021, 07:06 AM
#2
I should be working fine technically... however your ram set isn't on the motherboard's supported list. https://www.gigabyte.com/Motherboard/Z69...ort-memsup The 32gb two stick set of the same model number is support but the 16gb version isn't there. Best bet would likely be to update the bios and try get it to work. You could manually dial up the settings slowly and test the ram for stability if you want.
J
JesavGYT30
03-07-2021, 07:06 AM #2

I should be working fine technically... however your ram set isn't on the motherboard's supported list. https://www.gigabyte.com/Motherboard/Z69...ort-memsup The 32gb two stick set of the same model number is support but the 16gb version isn't there. Best bet would likely be to update the bios and try get it to work. You could manually dial up the settings slowly and test the ram for stability if you want.