Adapter not recognized on motherboard due to Wi-Fi/Bluetooth Pcie failure
Adapter not recognized on motherboard due to Wi-Fi/Bluetooth Pcie failure
I recently purchased a tp-link ax3000 archer t55e wifi bluetooth adapter for my build because my motherboard lacks built-in Wi-Fi and Ethernet isn't an option. I've been using another budget Wi-Fi adapter from tp-link, which, despite its slow speed, has functioned adequately. The problem started when I installed the card but it wasn't detected by Windows. I thought it was a driver issue, so I installed the recommended ones. After turning on the PC, it still wouldn't show up. I checked the motherboard BIOS and was surprised to find the card wasn't recognized at all. I tried numerous solutions—switching PCIe ports, resetting BIOS, updating drivers, changing BIOS settings, and even reinstalling the card—but nothing worked except occasionally during reboots when it appeared normally. I also brought the card back to the store, where it worked perfectly with their equipment. My specs are: motherboard Gigabyte A520M, 3060ti GPU, Ryzen 5600X, 2x8GB RAM, 3200PS PSU, and an old CoolerMaster Silent Pro M 850W. I have an M.2 drive and multiple SSDs/solid-state drives. I disconnected everything else except CPU, RAM, GPU, and the card, but still got no response. Thanks for your help! Update: I finally found a consistent workaround. It’s not ideal—first I power on the PC, then verify the card status. If it's missing, shut it down, restart right away with almost no delay. This usually resolves the issue. I suspect a power problem, possibly the motherboard struggles to supply enough energy during startup. With my 850W PSU, that seems unlikely, though. I also tried disconnecting all other components except CPU, RAM, GPU, and the card, but nothing changed. Any suggestions? Thank you!
You linked the tiny cable to the card and the USB header on the motherboard.
I finally found a method to get it running consistently. It’s not easy: I power on the PC, verify the card detection. If it fails (which is likely), I shut it down. As soon as it starts, I restart it right away—no more than a second delay. Now it should appear and function properly. This suggests the problem might be related to power supply or stability. With an 850W PSU, it seems capable of handling a single wireless adapter. I disconnected all other components except CPU, RAM, GPU, and the card, but nothing worked. Any suggestions? Thanks!