F5F Stay Refreshed Hardware Desktop 3200MHz RAM compatible with ASRock B550 Phantom Gaming 4

3200MHz RAM compatible with ASRock B550 Phantom Gaming 4

3200MHz RAM compatible with ASRock B550 Phantom Gaming 4

B
busyman201
Member
221
05-02-2020, 06:33 PM
#1
Checking compatibility for your ASRock B550 Phantom Gaming 4 setup. You're considering CORSAIR Vengeance LPX 16GB with 288-pin PC RAM DDR4 3200 MHz (PC4 25600). The memory model you mentioned is CMK16GX4M2B3200C16. I should confirm if this configuration works and suggest alternatives if needed. Also, with a 5600MHz processor, ensure the RAM speed matches your system requirements. If Asus boards are strict, you might need to stick to 8GB sticks for reliability.
B
busyman201
05-02-2020, 06:33 PM #1

Checking compatibility for your ASRock B550 Phantom Gaming 4 setup. You're considering CORSAIR Vengeance LPX 16GB with 288-pin PC RAM DDR4 3200 MHz (PC4 25600). The memory model you mentioned is CMK16GX4M2B3200C16. I should confirm if this configuration works and suggest alternatives if needed. Also, with a 5600MHz processor, ensure the RAM speed matches your system requirements. If Asus boards are strict, you might need to stick to 8GB sticks for reliability.

L
legovols
Junior Member
8
05-18-2020, 04:09 PM
#2
If you plan to use the igpu, it might be better to opt for a quicker RAM instead. Being slower isn't necessarily worse for Ryzen processors. This setup should function properly https://pcpartpicker.com/product/768bt6/...0hc18jdc01
L
legovols
05-18-2020, 04:09 PM #2

If you plan to use the igpu, it might be better to opt for a quicker RAM instead. Being slower isn't necessarily worse for Ryzen processors. This setup should function properly https://pcpartpicker.com/product/768bt6/...0hc18jdc01

S
Sashie3370
Junior Member
13
05-21-2020, 08:46 PM
#3
I was expecting to get a 1080TI eventually.
S
Sashie3370
05-21-2020, 08:46 PM #3

I was expecting to get a 1080TI eventually.

S
SillyDragon
Senior Member
586
05-31-2020, 03:45 PM
#4
The b550pg4 doesn't seem to handle RAM OC well, but the b550 steel legend above it performs reasonably at clocking RAMs, so it might be decent enough. Aim for a 1:1 clock speed around 5000MHz with DDR4, as Cezanne achieves impressive speeds. This will definitely be challenging for RAM OC, and not every board can hit that frequency. You may need to purchase a used bare PCB 2666 with fine C9BJZ ICs, preferably the latest revision, which should work well. Alternatively, consider the Klevv 3600C18, offering solid DDR support and stable performance at around 4800MHz. Keep in mind higher voltages (like 1.7V) can boost speeds but may reduce IC reliability. A fan is also recommended due to heat concerns from high frequencies and the need for stable voltage above 1.5V.
S
SillyDragon
05-31-2020, 03:45 PM #4

The b550pg4 doesn't seem to handle RAM OC well, but the b550 steel legend above it performs reasonably at clocking RAMs, so it might be decent enough. Aim for a 1:1 clock speed around 5000MHz with DDR4, as Cezanne achieves impressive speeds. This will definitely be challenging for RAM OC, and not every board can hit that frequency. You may need to purchase a used bare PCB 2666 with fine C9BJZ ICs, preferably the latest revision, which should work well. Alternatively, consider the Klevv 3600C18, offering solid DDR support and stable performance at around 4800MHz. Keep in mind higher voltages (like 1.7V) can boost speeds but may reduce IC reliability. A fan is also recommended due to heat concerns from high frequencies and the need for stable voltage above 1.5V.

J
jammintan418
Member
192
05-31-2020, 08:12 PM
#5
I'm really struggling to understand what you're going through.
J
jammintan418
05-31-2020, 08:12 PM #5

I'm really struggling to understand what you're going through.