F5F Stay Refreshed Hardware Desktop 3200g performance at 1.45 volts with a 1.5-volt spike during gaming sessions

3200g performance at 1.45 volts with a 1.5-volt spike during gaming sessions

3200g performance at 1.45 volts with a 1.5-volt spike during gaming sessions

L
Lubmo
Member
190
06-07-2023, 01:27 AM
#1
Playing Pso2: Ngs and keeping an eye on your CPU is smart. Running at 1.45v most of the time and hitting 1.5v occasionally is normal, but staying close to 1.2–1.35v helps prevent strain. No need to worry unless it keeps spiking. Consider adjusting the offset for smoother performance.
L
Lubmo
06-07-2023, 01:27 AM #1

Playing Pso2: Ngs and keeping an eye on your CPU is smart. Running at 1.45v most of the time and hitting 1.5v occasionally is normal, but staying close to 1.2–1.35v helps prevent strain. No need to worry unless it keeps spiking. Consider adjusting the offset for smoother performance.

M
Manticore1202
Member
69
06-27-2023, 02:08 PM
#2
Was es bei der Geschwindigkeit 1,5 v oder 1,45 v laufen? Es ist ziemlich hoch, aber 1,45 v sollte in Ordnung sein.
M
Manticore1202
06-27-2023, 02:08 PM #2

Was es bei der Geschwindigkeit 1,5 v oder 1,45 v laufen? Es ist ziemlich hoch, aber 1,45 v sollte in Ordnung sein.

C
CasCraft002
Junior Member
37
06-29-2023, 02:29 PM
#3
4ghz is probably what you were aiming for, around 3990mhz. I adjusted the GPU (Vega 8) to that frequency.
C
CasCraft002
06-29-2023, 02:29 PM #3

4ghz is probably what you were aiming for, around 3990mhz. I adjusted the GPU (Vega 8) to that frequency.

X
X_FredBear_X
Member
226
07-01-2023, 01:07 PM
#4
Ensure clockspeed is at least 4.2ghz when temperatures are stable, or use up to 1.45v maximum.
X
X_FredBear_X
07-01-2023, 01:07 PM #4

Ensure clockspeed is at least 4.2ghz when temperatures are stable, or use up to 1.45v maximum.

B
Birrow
Junior Member
8
07-19-2023, 03:23 AM
#5
The processor's silicon isn't top-notch, it caps at around 4GHz under load.
B
Birrow
07-19-2023, 03:23 AM #5

The processor's silicon isn't top-notch, it caps at around 4GHz under load.

I
ipad_100
Junior Member
29
07-20-2023, 11:26 PM
#6
Adjust the settings to 4.2ghz with 1.45v in the BIOS or try 3.8ghz at 1.3v
I
ipad_100
07-20-2023, 11:26 PM #6

Adjust the settings to 4.2ghz with 1.45v in the BIOS or try 3.8ghz at 1.3v