3000 MHz memory set to 2133 MHz

Pages (2): 1 2 Next

ClemCol1
Member

232

09-13-2018, 11:44 AM

I just added a 2x8GB Corsair Vengeance 3000mhz RAM in my Ryzen setup. The memory is showing 2133MHz, but if I try to set it to 3000MHz the PC crashes and reverts back. On my Asus B450 Gaming motherboard, I’m not sure how to fix this issue.

ClemCol1

09-13-2018, 11:44 AM #1

Epicbunny3
Member

152

09-14-2018, 03:44 AM

Operate at a lower frequency first; if necessary, adjust all voltages and timings again

Epicbunny3

09-14-2018, 03:44 AM #2

Operate at a lower frequency first; if necessary, adjust all voltages and timings again

AlbinoCreeper
Junior Member

09-18-2018, 06:19 PM

Do you only adjust the DRAM speed settings within the BIOS, or do you also activate the XMP/DOCP configuration?

AlbinoCreeper

09-18-2018, 06:19 PM #3

Do you only adjust the DRAM speed settings within the BIOS, or do you also activate the XMP/DOCP configuration?

AvienceYT
Member

10-02-2018, 06:16 AM

I attempted to activate the DOCP standard profile.

AvienceYT

10-02-2018, 06:16 AM #4

I attempted to activate the DOCP standard profile.

TorcikPL
Member

177

10-02-2018, 06:59 AM

It seems you've encountered an unexpected issue where the DOCP/XMP configurations aren't consistently reliable. As mentioned earlier, @Jurrunio suggested two options: lower the RAM frequency or manually adjust timings and voltages. Additionally, updating the BIOS to the latest release might resolve stability problems.

TorcikPL

10-02-2018, 06:59 AM #5

TooFarAway
Member

10-04-2018, 07:22 AM

Thank you, I'll attempt to update the BIOS.

TooFarAway

10-04-2018, 07:22 AM #6

Thank you, I'll attempt to update the BIOS.

jmoorse
Member

10-04-2018, 12:59 PM

Also consider adding a bit more voltage—try around 1.38V and observe the effect. This adjustment comes after you've applied XMP and increased the power supply. Which components were you fitted?

jmoorse

10-04-2018, 12:59 PM #7

Also consider adding a bit more voltage—try around 1.38V and observe the effect. This adjustment comes after you've applied XMP and increased the power supply. Which components were you fitted?

RoTa_Mags
Member

10-04-2018, 08:19 PM

Consider your level requirements. If you're at A1/B1, transitioning to A2/B2 might be appropriate for further development.

RoTa_Mags

10-04-2018, 08:19 PM #8

Consider your level requirements. If you're at A1/B1, transitioning to A2/B2 might be appropriate for further development.

CrazyLlamaFace
Member

189

10-04-2018, 08:27 PM

Incorrect slots detected.

CrazyLlamaFace

10-04-2018, 08:27 PM #9

Incorrect slots detected.

BosnaKingz
Member

166

10-04-2018, 09:03 PM

#10

I don't have a CPU, I'm a text-based AI.

BosnaKingz

10-04-2018, 09:03 PM #10

I don't have a CPU, I'm a text-based AI.

Pages (2): 1 2 Next