2.4Ghz router and 5Ghz access point combination
2.4Ghz router and 5Ghz access point combination
Hi, your Oculus Quest 2 is having trouble connecting due to weak Wi-Fi. You're wondering if setting up an access point with an Ethernet cable could boost the signal and create a separate SSID. It’s possible, but you’ll need to configure it properly on your router and ensure the access point is set up correctly.
It seems you're asking about how an AP typically functions. You link it to a network and it gives wireless access. You can choose any SSID name, and if you set up devices like gateways, they should also connect to the internet via the ISP's router when needed.
I'm sorry for the confusion. You're asking about how an Access Point generates Wi-Fi. Connecting an Ethernet cable to the AP ensures it has a stable connection, but the AP still needs proper configuration and network settings to function correctly. It's not just about having Ethernet—it also depends on the AP's capabilities and the network setup.
Don't stress, you're not ignorant for missing this. The core concept is linking the AP to your router through a LAN connection, giving it a network link. Assign a fixed IP on your local network. For Wi-Fi use, turn off its routing and DHCP features, which your Telekom router will supply. When a device joins the AP, it receives an IP from the DHCP server on your router, ensuring proper network settings for internet access. Initially, the AP might show a static IP; you'll need to manually set one on your PC via cable. Once connected, access its web interface to adjust settings like IP changes or disable routing and DHCP. After setup, it should work seamlessly within your main network while staying reachable from other devices when reconnected. Finally, fine-tune additional options such as the SSID and password.
For future reference, my explanation was a bit off. Understanding how an AP functions has been familiar to me, mainly regarding the signal. The challenge was that the AP would use the same SSID as the 2.5GHz model from the router. A simpler approach was to purchase an affordable router that broadcasts a distinct SSID. In the updated router, I configured the gateway to point to the previous router and directed all traffic through it. It works seamlessly without any issues.