F5F Stay Refreshed Power Users Networks 2 modems

2 modems

2 modems

Pages (2): 1 2 Next
T
Tomi83300
Junior Member
18
01-09-2025, 11:59 PM
#1
Looking for a solution to maintain wired internet in key areas like the basement without placing the router there. Considering a central location in your large mountain home, it's feasible to use two modems—one on the ground floor and another upstairs. Since you already have cable and DSL, you can set up both connections appropriately.
T
Tomi83300
01-09-2025, 11:59 PM #1

Looking for a solution to maintain wired internet in key areas like the basement without placing the router there. Considering a central location in your large mountain home, it's feasible to use two modems—one on the ground floor and another upstairs. Since you already have cable and DSL, you can set up both connections appropriately.

C
Cadariou
Posting Freak
835
01-16-2025, 02:23 AM
#2
Whenever possible, connect Ethernet to the basement. If not, place the router there and add a Wi-Fi extender in the main living areas.
C
Cadariou
01-16-2025, 02:23 AM #2

Whenever possible, connect Ethernet to the basement. If not, place the router there and add a Wi-Fi extender in the main living areas.

E
Exinity
Member
54
01-20-2025, 03:26 AM
#3
I'm part of an Xfinity subscription, and I’ll share this. Yes, you can have two modems. It’s possible, but it depends on what they’re used for. One might handle internet, the other for phone service. Xfinity probably charges for two separate connections if this setup is allowed. Cable modems need to meet specific requirements, and adding more splitters can disrupt the signal. If you have coax everywhere, check Moca or consider power line adapters. Moca adapters work with the same coax Xfinity provides, though they’re a bit more complicated to set up and can be costly.
E
Exinity
01-20-2025, 03:26 AM #3

I'm part of an Xfinity subscription, and I’ll share this. Yes, you can have two modems. It’s possible, but it depends on what they’re used for. One might handle internet, the other for phone service. Xfinity probably charges for two separate connections if this setup is allowed. Cable modems need to meet specific requirements, and adding more splitters can disrupt the signal. If you have coax everywhere, check Moca or consider power line adapters. Moca adapters work with the same coax Xfinity provides, though they’re a bit more complicated to set up and can be costly.

R
Ritorian
Junior Member
5
01-24-2025, 03:10 AM
#4
Checking Moca next. Another thought: should I connect a big network switch to my router or place the router inside the switch? And if yes, how do I set up a port so Apple TV can still use AirPlay?
R
Ritorian
01-24-2025, 03:10 AM #4

Checking Moca next. Another thought: should I connect a big network switch to my router or place the router inside the switch? And if yes, how do I set up a port so Apple TV can still use AirPlay?

X
xAdriLCT
Senior Member
702
01-24-2025, 11:10 AM
#5
The switch follows the router. If all connections are made to that switch or the router, everything will stay linked.
X
xAdriLCT
01-24-2025, 11:10 AM #5

The switch follows the router. If all connections are made to that switch or the router, everything will stay linked.

G
Gemini_Soul_
Member
176
01-24-2025, 04:06 PM
#6
However, this might slow things down since your router only supports 5 ports at 1 gigabit each.
G
Gemini_Soul_
01-24-2025, 04:06 PM #6

However, this might slow things down since your router only supports 5 ports at 1 gigabit each.

C
Caca_Gamer2005
Junior Member
7
01-25-2025, 11:07 AM
#7
Well you cant connect it before the router. Your modem should only be providing 1 Public IP. The routers job is to share that 1 Public IP with all the machines on the network. Basically heres how it is, you connect the switch via cat5e or cat6 to the router, between the switch and router you have a 1 Gbps link, can you saturate that link? Sure, but you would have to be transferring a shit load of data. Also consider that if two devices connected to the switch are communicating with each other, then it does not involve the router at all. Now if the router cant handle the level of traffic your throwing at it, then you need a new router.
C
Caca_Gamer2005
01-25-2025, 11:07 AM #7

Well you cant connect it before the router. Your modem should only be providing 1 Public IP. The routers job is to share that 1 Public IP with all the machines on the network. Basically heres how it is, you connect the switch via cat5e or cat6 to the router, between the switch and router you have a 1 Gbps link, can you saturate that link? Sure, but you would have to be transferring a shit load of data. Also consider that if two devices connected to the switch are communicating with each other, then it does not involve the router at all. Now if the router cant handle the level of traffic your throwing at it, then you need a new router.

F
FlorianSeuzi
Junior Member
22
01-28-2025, 11:15 AM
#8
Consider routers offering up to 10 gigabit speeds for your needs.
F
FlorianSeuzi
01-28-2025, 11:15 AM #8

Consider routers offering up to 10 gigabit speeds for your needs.

C
127
01-28-2025, 03:34 PM
#9
ASUS likely offers a model with multiple SFP ports, though it comes at a high price. Most consumers haven’t fully embraced 10 Gbps yet. You might be considering enterprise-level gear if you need that speed.
C
CptPterodactyl
01-28-2025, 03:34 PM #9

ASUS likely offers a model with multiple SFP ports, though it comes at a high price. Most consumers haven’t fully embraced 10 Gbps yet. You might be considering enterprise-level gear if you need that speed.

O
Oh_Choppa
Junior Member
17
01-30-2025, 08:09 AM
#10
O
Oh_Choppa
01-30-2025, 08:09 AM #10

Pages (2): 1 2 Next